PVT AND RESERVOIR FLUID ANALYSIS

PVT AND RESERVOIR FLUID ANALYSIS

TRAINING INTRODUCTION PVT AND RESERVOIR FLUID ANALYSIS

Hydrocarbon systems found in petroleum reservoirs are known to display multi-phase behavior over wide ranges of pressure and temperatures. The most important phases which is occur in petroleum reservoirs are: liquid phase (crude oil or condensates) and gas phase (natural gases).  This course will explain the fundamentals of hydrocarbon phase behavior and practical application in reservoir and production engineering. Firstly it will reviews the principles of phase behavior and ilustrate the use of phase diagram in describing the volumetric behavior of single-component, two-component, and multi-component system.

Also it will present numerous mathematical and graphical correlation for estimating physical and critical properties of the undefined petroleum fraction, evaluation of properties of natural gases and introduces their application in Darcy’s equation and material balance equation.  A complete and cohesive independent unit on methods of determining the crude oil physical properties , presents the concept and application of  vapor-liquid phase equilibria, developments and advanced in the field of empirical cubic equation of state and application in petroleum engineering. Details sceheme of splitting and lumping of petroleum-fraction.

Properly understanding the reservoir fluid properties is very significant and are very importance steps  during the entire life of the oil and reservoir developments and operations. This five-day training will provide a comprehensive knowledge and understanding of reservoir fluid properties and application to reservoir and production engineering to keep exellent reservoir and production performance as long as possible.

TRAINING OBJECTIVES PVT AND RESERVOIR FLUID ANALYSIS

  • Refresh the knowledge of the participants on reservoir fluid properties.
  • Understand the basic principles of hydrocarbon phase behavior and it’s application in petroleum engineering.
  • Learn the numerous mathematical and graphical correlation for estimating physical and critical properties of the undefined petroleum fraction
  • Enhance the knowledge on hydrocarbon phase behavior , freservoir fluid properties and application.
  • Gain additional knowledge on reasent technology in reservoir fluid properties calculation and correlation.
  • Knowledge sharing among the participants and instructors

FEATURING THE FOLLOWING SUBEJCTS PVT AND RESERVOIR FLUID ANALYSIS

Basic Phase Behavior

  • Single Component  Systems
  • Two Component  Systems
  • Multy Component  Systems
  • Classification of Reservoir and Reservoir Fluids

Pure Component Physical Properties and Characterizing Undefined Petroleum Fraction

  • General Correlation for Estimating Physical Properties of Hydrocarbon Fraction
  • Critical Compressibility Factors
  • Characterizing Hydrocarbon Heavy Fractions
  • Determining of Physical Properties of Heavy Petroleum Fraction from Correlation

Properties of Natural Gases

  • Behavior of Ideal Gases
  • Ideal Gas Mixtures
  • Properties of Ideal Gas Mixtures
  • Behavior of Real Gases
  • Effect of Non Hydrocarbon Components on the Z-Factor
  • Correction for Non Hydrocarbons
  • Correction for High-Molecular-Weight Gases
  • Direct Calculation of Compressibilty Factors
  • Compressibility of Natural Gases
  • Gas Formation Volume Factor
  • Gas Viscosity
  • Engineering Application of natural gases PVT Properties

Phase Behavior of Crude Oils

  • Crude Oil Density and Specific Gravity
  • Methods for Determining Density of Crude Oils as Unknown Composition
  • Methods for Determining Density of Liquids as Unknown Composition
  • Isothermal Compressibility Coefficient of Undersaturated Crude Oils
  • Density of Undersarurated Crude Oils
  • Gas Solubility
  • Oil Formation Factor of Undersaturated Crude Oils
  • Total Formation Volume Factor
  • Total System Isothermal Compressibility Coefficient
  • Crude Oil Viscosity
  • Bubble Point and Surface Tension
  • Application of the Crude Oil PVT P
  • The Material Balance Equation for Oil Reservoirs

Vapor-Liquid Phase Equilibria

  • Equilibrium Ratio
  • Flash Calculation
  • Application of Equilibrium Ratio in Petroleum Engineering

Equation of State

  • The General ized Form of Equation of State
  • Application of Equation of State for Petroleum Engineering
  • Three-Phase Equilibrium Calculation

Splitting Lumping Schemes of Petroleum Fraction

  • Splitting Schemes
  • Lumping Schemes
  • Simulation of Laboratory PVT Data by Equation of State

Physical Properties of  Crude Oil Determination

  • Density
  • Viscosity
  • Surface Tension
  • Flash Point
  • Pour Point
  • Sulphur Contents
  • Basic Sediment and Water

WHO SHOULD ATTEND

The following category of professionals should attend:

1. Field Young and Senior Operators.

2. Fresh Petroleum, Reservoir, Production and Facility/Process Engineer

3. Geoscientist

4. Asset Management Team members and Business Development Manager

5. Production Operators, Technician, Maintenance and Operation Personnel who is responsible for the Oil and Gas Reservoir development design and implementation

  1. Experienced professional who wants to refresh or broaden their understanding of Oil and Gas Properties in the purposes of fields development.
  2. Other professionals who want a better understanding of the subject

Investasi dan Fasilitas Training

  • Harga : (dilampirkan dalam Brosur penawaran)
  • Fasilitas : Certificate, Training kits, USB 8 GB, Lunch, Coffe Break, Souvenir, City Tour
  • Untuk peserta luar kota disediakan transportasi antar-jemput dari Bandara/Stasiun ke Hotel (berlaku bagi perusahaan yang mengirimkan minimal 2 peserta) Khusus untuk training di Yogyakarta.

 

Permintaan Brosur penawaran Training ( Waktu dan Tempat) silahkan Menghubungi kami.

Catatan :

  • Pelatihan ini dapat di-customized sesuai kebutuhan perusahaan Anda bila diselenggarakan dalam bentuk In-House Training. Untuk permintaan In-House Training dengan jenis topik lainya, silahkan mengirimkan ke alamat email yang tercantum di web kami.
  • Request Training. Jika anda membutuhkan informasi pelatihan yang belum tercantum pada website ini, atau anda ingin memberikan usulan materi yang sesuai dengan tingkat kebutuhan perusahaan anda, silahkan mengirimkan ke alamat email yang tercantum.
  • Bila tidak ada tanggal dan waktu atau yang tercantum sudah kadaluarsa didalam artikel mohon tanyakan kepada kami untuk jadwal terbarunya.

Informasi Jadwal training 2016 | 2017 | 2018 | 2019 | 2020 | 2021 | 2022 | di Yogyakarta, Jakarta, Bandung, Bogor, Surabaya, Malang, Bali, Lombok, Balikpapan, Makassar, Medan, Batam, Riau, Pontianak, Semarang, Solo, Manado, dan Kota-kota lainnya

 

OFFSHORE TECHNOLOGY & PIPELINE INTEGRITY ASSESSMENT

OFFSHORE TECHNOLOGY & PIPELINE INTEGRITY ASSESSMENT

TRAINING DESCRIPTION OFFSHORE TECHNOLOGY & PIPELINE INTEGRITY ASSESSMENT

The recent trend in the oil and gas industry has been towards oil and gas exploration in deep waters. The technology for deep water oil and gas exploration has witnessed tremendous growth. Offshore technology covers all sorts of engineering and technology and so it offers lots of different career opportunities in engineering and science. People entering the offshore industry are likely to be qualified, for instance, as mechanical, marine or structural engineers, naval architects or specialists in electronics and systems control. Alternatively they may be physicists, biologists, geologists or oceanographers. The fields of opportunity for graduate engineers and scientists and for those who have technical or craft qualifications are diverse, but the underlying interest and theme that helps everyone to work together is the sea and the marine business offshore.

TRAINING OBJECTIVES OFFSHORE TECHNOLOGY & PIPELINE INTEGRITY ASSESSMENT

The course provides participants with the essential knowledge and skills for a career in the marine and offshore industry and is designed for career conversion to prepare engineering diploma and degree graduates of other disciplines to broaden their employment prospects in the oil & gas industry.

TRAINING OUTLINE OFFSHORE TECHNOLOGY & PIPELINE INTEGRITY ASSESSMENT

1. Introduction

  • Offshore Platform
  • Briefs History
  • Unique Challenges for Structural Design
  • Decisions That Affect Structural Design

2. Platform Types

  • Fixed Platform Types
  • Floating Platform Types

3. Design Criteria

  • Weight Control
  • Gravity Loads
  • Environmental Loads
  • Accidental Loads
  • Cases

4. Design Loads
5. Structural Analyses and Design
6. Foundation Methods and Design
7. Fabrication
8. Loadout and Transportation

  • Loadout
  • Sea Transportation

9. Offshore Installation
10. Integrity Assessment Methods for Pipelines

  • Benefits of a Pipeline Integrity Management
  • Basis of an Automated PIMS

TRAINING PARTICIPANTS OFFSHORE TECHNOLOGY & PIPELINE INTEGRITY ASSESSMENT

Working professionals or individuals who wish to learn and broaden their employment prospects in the marine and offshore industry

Investasi dan Fasilitas Training

  • Harga : (dilampirkan dalam Brosur penawaran)
  • Fasilitas : Certificate, Training kits, USB 8 GB, Lunch, Coffe Break, Souvenir, City Tour
  • Untuk peserta luar kota disediakan transportasi antar-jemput dari Bandara/Stasiun ke Hotel (berlaku bagi perusahaan yang mengirimkan minimal 2 peserta) Khusus untuk training di Yogyakarta.

 

Permintaan Brosur penawaran Training ( Waktu dan Tempat) silahkan Menghubungi kami.

Catatan :

  • Pelatihan ini dapat di-customized sesuai kebutuhan perusahaan Anda bila diselenggarakan dalam bentuk In-House Training. Untuk permintaan In-House Training dengan jenis topik lainya, silahkan mengirimkan ke alamat email yang tercantum di web kami.
  • Request Training. Jika anda membutuhkan informasi pelatihan yang belum tercantum pada website ini, atau anda ingin memberikan usulan materi yang sesuai dengan tingkat kebutuhan perusahaan anda, silahkan mengirimkan ke alamat email yang tercantum.
  • Bila tidak ada tanggal dan waktu atau yang tercantum sudah kadaluarsa didalam artikel mohon tanyakan kepada kami untuk jadwal terbarunya.

Informasi Jadwal training 2016 | 2017 | 2018 | 2019 | 2020 | 2021 | 2022 | di Yogyakarta, Jakarta, Bandung, Bogor, Surabaya, Malang, Bali, Lombok, Balikpapan, Makassar, Medan, Batam, Riau, Pontianak, Semarang, Solo, Manado, dan Kota-kota lainnya

 

DRILLING ENGINEERING AND WELL PLANING

DRILLING ENGINEERING AND WELL PLANING

SASARAN BELAJAR KURSUS DRILLING ENGINEERING AND WELL PLANING

Setelah menyelesaikan kursus ini diharapkan peserta dapat :

  • Memahami prinsip-prinsip dasar dan berbagai perhitungan sederhana untuk pelaksanaan pemboran sumur-sumur minyak, gas dan reservoir panas bumi, pengembangan pelaksanaan  perhitungan ini untuk meningkatkan kinerja pemboran sumur-sumur di lapangan.
  • Melakukan diagnosis sederhana dan memengerti penyelesaian dan membuat suatu sumur minyak, gas atau panas bumi.
  • Membuat analisis sederhana terhadap data eksplorasi sumuran minyak, gas dan panas bumi, kemudian mampu melakukan perancangan global pemboran  kinerja dan merencanakan pengembangannya.
  • Melakukan perhitungan-perhitungan kuantitatip sederhana untuk perencanaan lumpur pemboran, semen, hidrolika, well control.
  • Mempergunakan pengetahuan dalam perancangan pemboran tegak, untuk keperluan perancangan pemboran sumur miring, sumur horizontal baik dengan teknologi overbalance maupun underbalance.

 

MATERI KURSUS DRILLING ENGINEERING AND WELL PLANING

  •  Introduction : Rotary Drilling Operations
  •  Steps to drilling a well
  • Types of rigs
  • Rig Components
  • Rig Systems
  • Rheology of Drilling and Completion Fluids
  • Equations and Inflow Performance RelationshipFunctions of Drilling/Completion
  •    Fluids
  • Fluid Types,
  • Fluid Models
  •  Introduction to Rotary Viscometer
  •  Other Testing Equipment
  • Objectives of Monitoring Fluids
  •  Mud System
  • General Equations and ConceptsDiagnostic tests
  • Water based muds
  • Oil based muds
  • Additives
  • Mud handling system
  •   Cementing
  •  Tubing DesignFunctions of cement
  • Cement Types
  • Cement Additives
  •  Oil Field Tubulars and Hydraulics
  • Drill string
  • Casing and tubing
  • Casing classification
  •  Stresses on casing
  • Casing setting depth
  • Burst and collapse calculations
  • Wellheads
  • Drilling System – Pressure Loss Calculations
  • Hydrostatics
  • Buoyancy
  • Flow through pipes and annuli
  • Flow path
  • Pressure loss calculations
  •  Drilling System – Bit & Nozzles
  •  Hydrostatics Bit Types
  • Bit Parts
  • Bit Classification
  • Bit Nozzles
  • Introduction to Well Control
  • Hydrostatics Definitions
  •  Causes of kicks
  • Kick indicators
  • Shut-in procedure
  • Well Kill Procedures
  • Directional Drilling
  •  Reasons for directional wells
  • Planning Trajectory
  • Kickoff Methods
  •  Survey Methods
  • Survey Calculations
  • Hole Assemblies

 

PRE-REQUISITE :

  • Latar belakang  : Operator/Senior Operator/Engineer/Non Engineer

Investasi dan Fasilitas Training

  • Harga : (dilampirkan dalam Brosur penawaran)
  • Fasilitas : Certificate, Training kits, USB 8 GB, Lunch, Coffe Break, Souvenir, City Tour
  • Untuk peserta luar kota disediakan transportasi antar-jemput dari Bandara/Stasiun ke Hotel (berlaku bagi perusahaan yang mengirimkan minimal 2 peserta) Khusus untuk training di Yogyakarta.

 

Permintaan Brosur penawaran Training ( Waktu dan Tempat) silahkan Menghubungi kami.

Catatan :

  • Pelatihan ini dapat di-customized sesuai kebutuhan perusahaan Anda bila diselenggarakan dalam bentuk In-House Training. Untuk permintaan In-House Training dengan jenis topik lainya, silahkan mengirimkan ke alamat email yang tercantum di web kami.
  • Request Training. Jika anda membutuhkan informasi pelatihan yang belum tercantum pada website ini, atau anda ingin memberikan usulan materi yang sesuai dengan tingkat kebutuhan perusahaan anda, silahkan mengirimkan ke alamat email yang tercantum.
  • Bila tidak ada tanggal dan waktu atau yang tercantum sudah kadaluarsa didalam artikel mohon tanyakan kepada kami untuk jadwal terbarunya.

Informasi Jadwal training 2016 | 2017 | 2018 | 2019 | 2020 | 2021 | 2022 | di Yogyakarta, Jakarta, Bandung, Bogor, Surabaya, Malang, Bali, Lombok, Balikpapan, Makassar, Medan, Batam, Riau, Pontianak, Semarang, Solo, Manado, dan Kota-kota lainnya

 

PENGELOLAAN LAPANGAN MATURE, TEKNIK & STRATEGI MENINGKATKAN PRODUKSI

PENGELOLAAN LAPANGAN MATURE, TEKNIK & STRATEGI MENINGKATKAN PRODUKSI

SASARAN BELAJAR :

Setelah menyelesaikan kursus ini diharapkan peserta dapat :

  • Memahami prinsip-prinsip dasar perhitungan dan melakukan optimisasi pada saat operasi produksi sumur-sumur dan reservoir minyak, gas dilaksanakan, pengembangan pelaksannaan optimisasi produksi ini untuk meningkatkan kinerja produksi sumuran dan lapangan mature.
  • Melakukan diagnosis sederhana dan memengerti penyelesaian permasalahan dalam operasi produksi sumur-sumur minyak dan gas bumi lapangan mature dan mencari strategi meningkatkan produksinya.
  • Membuat analisis sederhana terhadap data sumuran minyak, gas dan panas bumi, melakukan peramalan kinerja dan merencanakan pengembangan operasi produksi lapangan mature.
  • Melakukan perhitungan-perhitungan kuantitatip sederhana dari seluruh data perolehan data tubing, flowline, choke, perforasi, gravel-pack, sub-surface savety valve pada sumuran, merencanakan pengembangannya dengan memperhitungan kemampuan masing-masing sumuran pada lapangan mature.
  • Mempergunakan pengetahuan operasi produksi untuk keperluan penyelesaian permasalahan sumur seperti : pada saat penyemenan, penanganan scale, pasir, korosi dan damage yang mungkin terjadi pada sumuran minyak dan gas bumi lapangan mature.
  • Memahami prinsip-prinsip dasar perancangan : penyemenan, workover, stimulasi sumuran dengan  pengasaman dan perekahan hidrololik, perencanaan work over dan lain-lain untuk lapangan mature.


MATERI KURSUS PENGELOLAAN LAPANGAN MATURE :

  •   Geologic Considerations in producing Operation
  • Introduction
  • Sandstone Reservoirs
  • Geologic Factors Affecting Reservoir Properties in Sandstone
  • Application of Geologic concepts in Specific Sandstone
  • Carbonate Reservoirs
  •   Application of Geologic Concepts in Carbonate Reservoirs
  • Reservoir Considerations in Well Completions
  •   Introduction
  •   Hydrocarbon Properties of Oil and Gas
  • Recommendations of Obtaining Good Test Data
  •   “Eyeball” Interpretation of Pressure Charts
  • Well Completion Design
  •   Factors Influencing Well Completion Design
  • Conventional Tubular Configuration
  •   Unconventional Tubular Configurations
  •   Sizing Production Tubular
  •   Completion Interval
  •   Permanent Well Completions (PWC)
  • Tubingless Completion
  • Tubing Strings,Packers,Subsurface Control Equipment
  • Tubing Strings
  •   Steel Grades
  • Tubing Connections
  • Makeup of API Threaded connection
  •   Design of Tubing Strings
  • High Strength Tubing
  •   Physical Properties of Steel
  • Sensitivities of High Strength Tubing
  •   Tubing Inspection
  •   Tubing Handling Practices
  •   Equipment for Use With-Strength Tubing
  •   Tubing Running Practices
  • API Publication List
  • Packers and Subsurface Control Equipment
  • Production Packers
  • Subsurface Control Equipment
  •  Perforating Oil and Gas Wells
  •   Introduction
  •   Types of Perforators
  • Evaluation of Perforator Performance
  •   Factors  Aftecting Gun Perforating Results
  • Perforating in a Clean Fluid with Differential Pressure Into Wellbore
  • A Comparison between the GEO-VANN System and Other Perforating Methods in Wells Equipped with Packers
  • Completion and Workover Fluids
  • Functions-Requirements-Selection Criteria
  • Formation Damage Related to Solids
  • Oil Fluids-Practical Application
  • Conventional Water-Base Mud
  • Oil Base or Invert-Emulsion Muds
  • Foam
  • Perforating Fluids
  • Packer Fluids
  • Well Killing
  •  Production Logging
  • Introduction
  •   Logging Device
  •   Application of Production logging
  • Field Examples of Production Logging Techniques
  • Primary Cement Evaluation
  •  Problem Well Analysis
  • Problem Wells
  • Problem Well Analysis Checklist
  • Parafin and Asphaltene
  • Introduction
  • Paraffin and Asphaltene Chemistry
  • Deposition Mechanisms
  • Removal of Wax Deposits
  • Preventing or Decreasing Wax Deposition
  • Design of Wax Control
  • Squeeze Cementing-Remedial Cementing
  •   Introduction
  • Theoretical Considerations
  • Practical Considerations
  • Special Squeeze Cementing Situations
  • Planning a Squeeze Cement Job
  • Normal Operational Procedures
  • Other Operational Procedures
  • Plug-Back Operations
  • Special Cement Systems
  • Sand Control
  •   Introduction
  • Reduction of Drag Force
  • Mechanical Methods of Sand Control
  •   Practical Considerations in Gravel Packing
  • Use of screen Without Gravel
  • Resin Consolidation Methods
  • Formation Damage
  •   Introduction
  • Basic Causes of Damage
  • Classification of Damage Mechanisms
  •   Reduced Absolute Permeability
  •   Increased Fluid Viscosity (Emulsion)
  •   Diagnosis of Formation Damage
  • Surfactants for Well Treatments
  • Characteristics of Surfactants
  • Use and Action of Surfactant
  • Formation Damage Susceptible to Surfactant Treatment
  •   Preventing or Removing Damage
  •   Well Stimulation With Surfactants
  • Increasing Effectiveness of Rod Pumping
  • Prevention of Well Damage
  • Acidizing
  • Acids Used in Well Stimulation
  •   Acid Additives
  • Carbonate Acidizing
  •   Acidizing Techniques for Caronat Formations
  •   Sandstone Acidizing
  •   Potential Safety Hazard in Acidizing
  • Hydraulic Fracturing
  •   Introduction
  •   Mechanics of Fracturing
  •   Production Increase from Fracturing
  • Propping the Fracture
  • Frac Fluids
  •   Frac Job Design
  •   Frac Job Evaluation Techniques
  •  Scale Deposition,Removal,and Prevention
  •   Introduction
  • Causes of Scale Deposition
  •   Prediction and Identification of Scale
  •   Scale Removal
  •   Scale Prevention
  • Corrosion Control
  • The Corrosion Process
  •   Detection and Measurement of Corrosion
  •   Corrosion Control
  • Workover and Completion Rigs Workover System
  • Conventional Production Rigs
  • Non-Conventional Workovers System
  •   Concentric Tubing Workovers
  • Workover Planning
  • Reasons for Workover
  • Workover to Alleviate Formation Damage
  • Workover for Low Permeability Well
  • Workover of Wells in Partially Pressure-Depleted Reservoirs
  •   Workover to Reduces Water Production in Oil and Gas Wells
  •   Workover to Reduces Gas Production in Oil Wells
  • Workover for Sand Control
  •   Workover to Repair Mechanical Failure
  • Workover to Change Zones or Reservoirs
  •   Workover to Multicomplete
  • Workover to Increase Production in Well Producing High Viscosity (Low Gravity) Oil
  • Workover Economics

PRE-REQUISITE :

  •   Latar belakang  : Operator, Senior Operator, Engineer/Non Engineer

 

Investasi dan Fasilitas Training

  • Harga : (dilampirkan dalam Brosur penawaran)
  • Fasilitas : Certificate, Training kits, USB 8 GB, Lunch, Coffe Break, Souvenir, City Tour
  • Untuk peserta luar kota disediakan transportasi antar-jemput dari Bandara/Stasiun ke Hotel (berlaku bagi perusahaan yang mengirimkan minimal 2 peserta) Khusus untuk training di Yogyakarta.

 

Permintaan Brosur penawaran Training ( Waktu dan Tempat) silahkan Menghubungi kami.

Catatan :

  • Pelatihan ini dapat di-customized sesuai kebutuhan perusahaan Anda bila diselenggarakan dalam bentuk In-House Training. Untuk permintaan In-House Training dengan jenis topik lainya, silahkan mengirimkan ke alamat email yang tercantum di web kami.
  • Request Training. Jika anda membutuhkan informasi pelatihan yang belum tercantum pada website ini, atau anda ingin memberikan usulan materi yang sesuai dengan tingkat kebutuhan perusahaan anda, silahkan mengirimkan ke alamat email yang tercantum.
  • Bila tidak ada tanggal dan waktu atau yang tercantum sudah kadaluarsa didalam artikel mohon tanyakan kepada kami untuk jadwal terbarunya.

Informasi Jadwal training 2016 | 2017 | 2018 | 2019 | 2020 | 2021 | 2022 | di Yogyakarta, Jakarta, Bandung, Bogor, Surabaya, Malang, Bali, Lombok, Balikpapan, Makassar, Medan, Batam, Riau, Pontianak, Semarang, Solo, Manado, dan Kota-kota lainnya

 

TES SUMUR DAN ANALISA TEKANAN

TES SUMUR DAN ANALISA TEKANAN

SASARAN BELAJAR

Setelah menyelesaikan kursus ini diharapkan peserta dapat :

  • Memahami prinsip dasar operasi dan interpretasi tes sumur
  • Melakukan interpretasi data tes sumur
  • Membuat perencanaan atau desain sustu tes sumur
  • Membuat atau menggunakan program-program kecil yang membantu dalam interpretasi data tes sumur

MATERI KURSUS TES SUMUR DAN ANALISA TEKANAN

Pengenalan Teknik Perminyakan

Dasar-Dasar Tes Sumur

  • Prinsip Dasar Tes Sumur
  • Aliran Fluida Dalam Media Berpori
  • Macam-Macam Tes Sumur

Pressure Drawdown Test

  • Analisis Pressure Drawdown Pada Periode Transien
  •  Analisis Pressure Drawdown Pada Periode Transien Lanjut
  • Analisis Pressure Drawdown Pada Periode Semi-Steady State

Pressure Buildup Test

  • Prinsip Superposisi
  •  Pressure Buildup Ideal
  • Actual Buildup Case
  • Lamanya Pengaruh Wellbore Storage
  •  Penentuan Tekanan Rata-Rata
  • Pressure Buildup Untuk Sistem Lebih Dari Satu Fasa
  •  Analisis Pressure Buildup Dibawah Pengaruh Redistribusi Fasa Pada Lubang Bor

Multi Rate Test

  • Persamaan Dasar Untuk Multiple Rate Test
  •  Two Rate Flow Test
  • Deliverability Test
  • Variable Injection Rate Test

Multiple Well Test

  •  Interference Test
  • Interference Test Pada Reservoir Terbatas (Bounded)
  • Pulse Testing
  • Analisis Pulse Test Dengan Metode Stegemeier

Analisis Tes Sumur Dengan Menggunakan Type Curve

  •  Prinsip Analisis Type Curve
  • Ramey’s Type Curve dan McKinley Type Curve

Tes Sumur Sumur Gas

  •  Sifat-Sifat Gas
  • Analisis Tes Sumur Pada Sumur Gas

Injection Well Testing

  •  Injectivity Analysis
  • Falloff Test Analysis
  • Step-Rate Testing

Drill Stem Testing

  • Analisis DST

Tes Sumur Untuk Reservoir Rekah Buatan

  • Transien Tekanan Pada Hydraulically Vertical Fractured Reservoir
  • Efek Skin, Wellbore Storage dan Geometri Rekahan Terhadap Respon Tekanan
  • Finite Fracture Conductivity
  • Massive Hydraulic Fracturing dan Pengujian Pada Tekanan Konstan

Tes Sumur Untuk Reservoir Rekah Alami

  • Kelakuan Transien Tekanan Pada Reservoir Rekah Alami
  • Efek Incomplete Test
  • Pendekatan Gradient Flow Model
  • Analisis Transien Tekanan Pada Reservoir Rekah Alami Dibawah Pengaruh Alirab Spherical

Interpretasi Data Tes Sumur Horizontal

  •   Analisis Transien Tekanan Sumur Horizontal Secara Grafis
  •  Analisis Transien Tekanan Sumur Horizontal Dengan Type Curve Matching

Well Sounder

  • Analisis Data Well Sounder

TARGET PESERTA :

  • Operator/Sr. Operator/Jr. Engineer/Non-Engineer

PRE-REQUISITE

  • Mempunyai pengetahuan dasar teknik perminyakan
  • Mempunyai pengetahuan dasar teknik reservoir dan produksi

Investasi dan Fasilitas Training

  • Harga : (dilampirkan dalam Brosur penawaran)
  • Fasilitas : Certificate, Training kits, USB 8 GB, Lunch, Coffe Break, Souvenir, City Tour
  • Untuk peserta luar kota disediakan transportasi antar-jemput dari Bandara/Stasiun ke Hotel (berlaku bagi perusahaan yang mengirimkan minimal 2 peserta) Khusus untuk training di Yogyakarta.

 

Permintaan Brosur penawaran Training ( Waktu dan Tempat) silahkan Menghubungi kami.

Catatan :

  • Pelatihan ini dapat di-customized sesuai kebutuhan perusahaan Anda bila diselenggarakan dalam bentuk In-House Training. Untuk permintaan In-House Training dengan jenis topik lainya, silahkan mengirimkan ke alamat email yang tercantum di web kami.
  • Request Training. Jika anda membutuhkan informasi pelatihan yang belum tercantum pada website ini, atau anda ingin memberikan usulan materi yang sesuai dengan tingkat kebutuhan perusahaan anda, silahkan mengirimkan ke alamat email yang tercantum.
  • Bila tidak ada tanggal dan waktu atau yang tercantum sudah kadaluarsa didalam artikel mohon tanyakan kepada kami untuk jadwal terbarunya.

Informasi Jadwal training 2016 | 2017 | 2018 | 2019 | 2020 | 2021 | 2022 | di Yogyakarta, Jakarta, Bandung, Bogor, Surabaya, Malang, Bali, Lombok, Balikpapan, Makassar, Medan, Batam, Riau, Pontianak, Semarang, Solo, Manado, dan Kota-kota lainnya

 

RESERVOIR FLUID ANALYSIS

RESERVOIR FLUID ANALYSIS

TRAINING INTRODUCTION RESERVOIR FLUID ANALYSIS

Hydrocarbon systems found in petroleum reservoirs are known to display multi-phase behavior over wide ranges of pressure and temperatures. The most important phases which is occur in petroleum reservoirs are: liquid phase (crude oil or condensates) and gas phase (natural gases).  This course will explain the fundamentals of hydrocarbon phase behavior and practical application in reservoir and production engineering. Firstly it will reviews the principles of phase behavior and ilustrate the use of phase diagram in describing the volumetric behavior of single-component, two-component, and multi-component system.

Also it will present numerous mathematical and graphical correlation for estimating physical and critical properties of the undefined petroleum fraction, evaluation of properties of natural gases and introduces their application in Darcy’s equation and material balance equation.  A complete and cohesive independent unit on methods of determining the crude oil physical properties , presents the concept and application of  vapor-liquid phase equilibria, developments and advanced in the field of empirical cubic equation of state and application in petroleum engineering. Details sceheme of splitting and lumping of petroleum-fraction.

Properly understanding the reservoir fluid properties is very significant and are very importance steps  during the entire life of the oil and reservoir developments and operations. This five-day training will provide a comprehensive knowledge and understanding of reservoir fluid properties and application to reservoir and production engineering to keep exellent reservoir and production performance as long as possible.

TRAINING OBJECTIVES RESERVOIR FLUID ANALYSIS

  • Refresh the knowledge of the participants on reservoir fluid properties.
  • Understand the basic principles of hydrocarbon phase behavior and it’s application in petroleum engineering.
  • Learn the numerous mathematical and graphical correlation for estimating physical and critical properties of the undefined petroleum fraction
  • Enhance the knowledge on hydrocarbon phase behavior , freservoir fluid properties and application.
  • Gain additional knowledge on reasent technology in reservoir fluid properties calculation and correlation.
  • Knowledge sharing among the participants and instructors

TRAINING OUTLINE RESERVOIR FLUID ANALYSIS

FEATURING THE FOLLOWING SUBEJCTS

1.      Basic Phase Behavior

  • Single Component Systems
  • Two Component Systems
  • Multy Component Systems
  • Classification of Reservoir and Reservoir Fluids

2.      Pure Component Physical Properties and Characterizing Undefined Petroleum Fraction

  • General Correlation for Estimating Physical Properties of Hydrocarbon Fraction
  • Critical Compressibility Factors
  • Characterizing Hydrocarbon Heavy Fractions
  • Determining of Physical Properties of Heavy Petroleum Fraction from Correlation

3.      Properties of Natural Gases

  • Behavior of Ideal Gases
  • Ideal Gas Mixtures
  • Properties of Ideal Gas Mixtures
  • Behavior of Real Gases
  • Effect of Non Hydrocarbon Components on the Z-Factor
  • Correction for Non Hydrocarbons
  • Correction for High-Molecular-Weight Gases
  • Direct Calculation of Compressibilty Factors
  • Compressibility of Natural Gases
  • Gas Formation Volume Factor
  • Gas Viscosity
  • Engineering Application of natural gases PVT Properties

4.      Phase Behavior of Crude Oils

  • Crude Oil Density and Specific Gravity
  • Methods for Determining Density of Crude Oils as Unknown Composition
  • Methods for Determining Density of Liquids as Unknown Composition
  • Isothermal Compressibility Coefficient of Undersaturated Crude Oils
  • Density of Undersarurated Crude Oils
  • Gas Solubility
  • Oil Formation Factor of Undersaturated Crude Oils
  • Total Formation Volume Factor
  • Total System Isothermal Compressibility Coefficient
  • Crude Oil Viscosity
  • Bubble Point and Surface Tension
  • Application of the Crude Oil PVT P
  • The Material Balance Equation for Oil Reservoirs

5.      Vapor-Liquid Phase Equilibria

  • Equilibrium Ratio
  • Flash Calculation
  • Application of Equilibrium Ratio in Petroleum Engineering

6.      Equation of State

  • The General ized Form of Equation of State
  • Application of Equation of State for Petroleum Engineering
  • Three-Phase Equilibrium Calculation

7.      Splitting Lumping Schemes of Petroleum Fraction

  • Splitting Schemes
  • Lumping Schemes
  • Simulation of Laboratory PVT Data by Equation of State

WHO SHOULD ATTEND

The following category of professionals should attend:

  1. Field Young and Senior Operators.
  2. Fresh Petroleum, Reservoir, Production and Facility/Process Engineer
  3. Geoscientist
  4. Asset Management Team members and Business Development Manager
  5. Production Operators, Technician, Maintenance and Operation Personnel who is responsible for the Oil and Gas Reservoir development design and implementation
  6. Experienced professional who wants to refresh or broaden their understanding of Oil and Gas Properties in the purposes of fields development.
  7. Other professionals who want a better understanding of the subject

Investasi dan Fasilitas Training

  • Harga : (dilampirkan dalam Brosur penawaran)
  • Fasilitas : Certificate, Training kits, USB 8 GB, Lunch, Coffe Break, Souvenir, City Tour
  • Untuk peserta luar kota disediakan transportasi antar-jemput dari Bandara/Stasiun ke Hotel (berlaku bagi perusahaan yang mengirimkan minimal 2 peserta) Khusus untuk training di Yogyakarta.

 

Permintaan Brosur penawaran Training ( Waktu dan Tempat) silahkan Menghubungi kami.

Catatan :

  • Pelatihan ini dapat di-customized sesuai kebutuhan perusahaan Anda bila diselenggarakan dalam bentuk In-House Training. Untuk permintaan In-House Training dengan jenis topik lainya, silahkan mengirimkan ke alamat email yang tercantum di web kami.
  • Request Training. Jika anda membutuhkan informasi pelatihan yang belum tercantum pada website ini, atau anda ingin memberikan usulan materi yang sesuai dengan tingkat kebutuhan perusahaan anda, silahkan mengirimkan ke alamat email yang tercantum.
  • Bila tidak ada tanggal dan waktu atau yang tercantum sudah kadaluarsa didalam artikel mohon tanyakan kepada kami untuk jadwal terbarunya.

Informasi Jadwal training 2016 | 2017 | 2018 | 2019 | 2020 | 2021 | 2022 | di Yogyakarta, Jakarta, Bandung, Bogor, Surabaya, Malang, Bali, Lombok, Balikpapan, Makassar, Medan, Batam, Riau, Pontianak, Semarang, Solo, Manado, dan Kota-kota lainnya

 

WELL TEST ANALYSIS

WELL TEST ANALYSIS

ABSTRACK WELL TEST ANALYSIS

This course will provide participants with a comprehensive theoretical and practical knowledge of well test analysis techniques. Emphasis will be placed on the practical aspects of well testing – a number of relevant examples will be presented. The use of analysis results to assist in decision making related to reservoir development and well completion will be illustrated through real-life case histories. Attendees are encouraged to bring well test used in recent projects for discussion.

OUTLINE WELL TEST ANALYSIS

  1. Review of the Flow Equations Including the Diffusivity and Darcy Equation
  2. Buildup Analysis: Principle of Superposition, Horner Plot, Average Reservoir Pressure
  3. Reservoir Boundaries and Channel Analysis
  4. Wellbore Skin Factor and Partial Penetration
  5. Wellbore Storage and the Use of Type Curves Pressure Derivative
  6. Draw-Down Testing and Reservoir Limit Testing
  7. Hydraulically and Naturally Fractured Wells
  8. Well Test Objectives
  9. Data Quality (Pressure, Production and Fluids)
  10. Well Test Interpretations
  11. Gas Well Testing
  12. Water Injectivity Tests
  13. Well Test Design and Planning

Investasi dan Fasilitas Training

  • Harga : (dilampirkan dalam Brosur penawaran)
  • Fasilitas : Certificate, Training kits, USB 8 GB, Lunch, Coffe Break, Souvenir, City Tour
  • Untuk peserta luar kota disediakan transportasi antar-jemput dari Bandara/Stasiun ke Hotel (berlaku bagi perusahaan yang mengirimkan minimal 2 peserta) Khusus untuk training di Yogyakarta.

 

Permintaan Brosur penawaran Training ( Waktu dan Tempat) silahkan Menghubungi kami.

Catatan :

  • Pelatihan ini dapat di-customized sesuai kebutuhan perusahaan Anda bila diselenggarakan dalam bentuk In-House Training. Untuk permintaan In-House Training dengan jenis topik lainya, silahkan mengirimkan ke alamat email yang tercantum di web kami.
  • Request Training. Jika anda membutuhkan informasi pelatihan yang belum tercantum pada website ini, atau anda ingin memberikan usulan materi yang sesuai dengan tingkat kebutuhan perusahaan anda, silahkan mengirimkan ke alamat email yang tercantum.
  • Bila tidak ada tanggal dan waktu atau yang tercantum sudah kadaluarsa didalam artikel mohon tanyakan kepada kami untuk jadwal terbarunya.

Informasi Jadwal training 2016 | 2017 | 2018 | 2019 | 2020 | 2021 | 2022 | di Yogyakarta, Jakarta, Bandung, Bogor, Surabaya, Malang, Bali, Lombok, Balikpapan, Makassar, Medan, Batam, Riau, Pontianak, Semarang, Solo, Manado, dan Kota-kota lainnya

 

CONDENSATE & WATER DISTRIBUTION SYSTEM

CONDENSATE & WATER DISTRIBUTION SYSTEM

OBJECTIVES :

After participate in this course, the participants will be able and capable to :

  • Understand the basic concept of oil , gas,condensate and water handling processes and facilities, and how to operate this technology in field application.
  •   Diagnostic of oil and gas condensate reservoir performance under actual drive mechanism and future performance with current handling processes.
  •   Analyze the production potential of reservoir under with actual handling system processes and to plan the better development processes according to reservoir capacity.
  • Understand the fundamentals of microscopic and macroscopic aspects and phenomena of oil, gas condensate and water handling processes.


COURSE OUT-LINE CONDENSATE & WATER DISTRIBUTION SYSTEM :

1.    Condensate and Oil Handling Facilities

  • Oil Well Surface Production Equipment and Operation
  • Oil Well Equipment
  • Oil Well Production Operation
  • Well Automatic Safety Device
  • Oil Gathering System. Manifold and Flowline
  • Oil Gathering System
  • Manifold System
  • Flow line Sizing and Design
  • Crude Oil and Gas Separation
  • Separator and Principle of Separation
  • Design of Separator
  • Oil Dehydration
  • Principles of Measurement
  •  Introduction to Measurement
  •  Crude Oil Measurement
  • Gas Measurement
  • Well Test
  •  Introduction
  • Responsibility for Test
  • Preparation for Test
  • Types of Well Test
  • Equipment and Procedures
  • Accuracy of Fluid Measurement
  • Problem in Testing
  • Type of Test

2.    Water Handling Facilities

  •   The Chemistry of Water
  • Chemical and Physical Properties
  • Water Sampling Procedures
  • Quantitative Analysis of Oilfield Waters
  • Water Analysis Techniques
  • Water Formed Scales
  • Why Scales Form
  • Predicting Scale Formation
  •   Mixing Waters – Compatibility
  •   Preventing Scale Formation
  •   Scale Removal Methods
  • Corrosion in Water Injection System and Disposal System
  • Theory of Corrosion
  • The Effect of Metal Composition
  •   Effect of Water Composition
  • Forms of Corrosion
  •   Corrosion Control Methods
  • Corrosion Inhibitors
  • Internal Coatings and Linings for Tubular Goods
  • Internal Tank Coatings and Cathodic Protection
  •   Non-Metallic Tubular Goods Types
  •   Removal of Corrosive Gases from Water
  • Oxygen Removal
  •   Removal of Hydrogen Sulfide from Water
  • Removal of Carbon Dioxide from Water
  •   Oxygen Exclusion
  •   Design to Minimize Corrosion
  •   Corrosion Monitoring Techniques

AUDIENCE:

No specified  (Operator/Sr. Operator/Engineer or Non Engineer)

Investasi dan Fasilitas Training

  • Harga : (dilampirkan dalam Brosur penawaran)
  • Fasilitas : Certificate, Training kits, USB 8 GB, Lunch, Coffe Break, Souvenir, City Tour
  • Untuk peserta luar kota disediakan transportasi antar-jemput dari Bandara/Stasiun ke Hotel (berlaku bagi perusahaan yang mengirimkan minimal 2 peserta) Khusus untuk training di Yogyakarta.

 

Permintaan Brosur penawaran Training ( Waktu dan Tempat) silahkan Menghubungi kami.

Catatan :

  • Pelatihan ini dapat di-customized sesuai kebutuhan perusahaan Anda bila diselenggarakan dalam bentuk In-House Training. Untuk permintaan In-House Training dengan jenis topik lainya, silahkan mengirimkan ke alamat email yang tercantum di web kami.
  • Request Training. Jika anda membutuhkan informasi pelatihan yang belum tercantum pada website ini, atau anda ingin memberikan usulan materi yang sesuai dengan tingkat kebutuhan perusahaan anda, silahkan mengirimkan ke alamat email yang tercantum.
  • Bila tidak ada tanggal dan waktu atau yang tercantum sudah kadaluarsa didalam artikel mohon tanyakan kepada kami untuk jadwal terbarunya.

Informasi Jadwal training 2016 | 2017 | 2018 | 2019 | 2020 | 2021 | 2022 | di Yogyakarta, Jakarta, Bandung, Bogor, Surabaya, Malang, Bali, Lombok, Balikpapan, Makassar, Medan, Batam, Riau, Pontianak, Semarang, Solo, Manado, dan Kota-kota lainnya

 

Hazardous Materials Storage & Segregation

Hazardous Materials Storage & Segregation

MATERI PELATIHAN HAZARDOUS MATERIALS

1. Introduction

2. Chemical Classification System, including:

  • Hazardous Substances;
  • Dangerous Goods; and
  • Poisons

3.  Legislation and Legal Obligations, including:

  • The Act;
  • The Regulation;
  • Codes of Practice;
  • Standards; and
  • Due Diligence

4.  Chemical Risk Management, including

  • Information sources;
  • Registers;
  • Consultation;
  • Risk Management Process;
  • Occupational Exposure Levels; and
  • Monitoring and Surveillance

5.  Storage and handling, including:

  • Separation;
  • Segregation;
  • Transit Storage;
  • Handling Systems;
  • Licensing and Permit Requirements;
  • Security issues;
  • Information Placards;
  • Fire Protection Systems;
  • Spill Containment; and
  • Manifest and Site Plans

6. Emergency preparedness and planning

7. Transportation, including:

  • Package and Bulk Dangerous Goods;
  • Placarding of Transported Dangerous Goods;
  • Placarding of Bulk Containers;
  • Placarding of Packaged Dangerous Goods;
  •  Segregation of Transported Dangerous Goods;

Investasi dan Fasilitas Training

  • Harga : (dilampirkan dalam Brosur penawaran)
  • Fasilitas : Certificate, Training kits, USB 8 GB, Lunch, Coffe Break, Souvenir, City Tour
  • Untuk peserta luar kota disediakan transportasi antar-jemput dari Bandara/Stasiun ke Hotel (berlaku bagi perusahaan yang mengirimkan minimal 2 peserta) Khusus untuk training di Yogyakarta.

 

Permintaan Brosur penawaran Training ( Waktu dan Tempat) silahkan Menghubungi kami.

Catatan :

  • Pelatihan ini dapat di-customized sesuai kebutuhan perusahaan Anda bila diselenggarakan dalam bentuk In-House Training. Untuk permintaan In-House Training dengan jenis topik lainya, silahkan mengirimkan ke alamat email yang tercantum di web kami.
  • Request Training. Jika anda membutuhkan informasi pelatihan yang belum tercantum pada website ini, atau anda ingin memberikan usulan materi yang sesuai dengan tingkat kebutuhan perusahaan anda, silahkan mengirimkan ke alamat email yang tercantum.
  • Bila tidak ada tanggal dan waktu atau yang tercantum sudah kadaluarsa didalam artikel mohon tanyakan kepada kami untuk jadwal terbarunya.

Informasi Jadwal training 2016 | 2017 | 2018 | 2019 | 2020 | 2021 | 2022 | di Yogyakarta, Jakarta, Bandung, Bogor, Surabaya, Malang, Bali, Lombok, Balikpapan, Makassar, Medan, Batam, Riau, Pontianak, Semarang, Solo, Manado, dan Kota-kota lainnya

 

RESERVOIR ENGINEERING FOR OTHER DICIPLINES

RESERVOIR ENGINEERING FOR OTHER DICIPLINES

SASARAN BELAJAR KURSUS RESERVOIR ENGINEERING FOR OTHER DICIPLINES

Setelah menyelesaikan kurus ini diharapkan peserta dapat :

  • Memahami prinsip-prinsip dasar eksploitasi minyak, gas bumi yang dikenal sebagai dasar reservoir dalam teknologi perminyakan.
  • Melakukan diagnosis sederhana dan memahami pengelolaan data operasi perminyakan, seperti data geologi produksi, data batuan dan fluida reservoir, data produksi, data operasi pemboran, data analisis keekonomian reservoir
  • Membuat analisis sederhana terhadap data tersebut dan melakukan pengolahannya dengan mempergunakan metoda standar untuk perhitungan reservoir.
  • Melakukan perhitungan-perhitungan kuantitatif dari seluruh data perolehan operasi perminyakan : geologi produksi, evaluasi data formasi produktif, data reservoir, data pemboran, data produksi dan data keekonomian, untuk keperluan teknik reservoir.


MATERI KURSUS RESERVOIR ENGINEERING FOR OTHER DICIPLINES

  1. Pengertian Tentang Data Teknik Operasi Perminyakan dan Teknik Pengelolaannya
    • o Data Geologi Produksi
    • o Data Teknik Reservoir
    • o Data Teknik Pemboran
    • o Data Teknik Produksi
    • o Data Analisis Keekonomian
  2. Eksplorasi Geofisika dan Geologi
    • o Dasar Eksplorasi Geofisika
    • o Dasar Eksplorasi Geologi
    • o Pemodelan G&G
  3. Reservoir Hidrokarbon
    • o Kondisi Terbentuknya Reservoir
    • o Tekanan dan Temperatur Reservoir
    • o Fluida Reservoir
    • o Batuan Reservoir
  4. Evaluasi Formasi Reservoir Hidrokarbon
    • o Penentuan Formasi Permeabel
    • o Penentuan Porositas Batuan
    • o Penentuan Saturasi Fluida
    • o Penentuan ketebalan Reservoir Rata-rata
    • o Peralatan yang Terkait dengan Pelaksanaan Evaluasi Formasi
  5. Pemboran Sumur Minyak
    • o Operasi
    • o Biaya
    • o Complesion
    • o Fluida Pemboran
    • o Data Akuisisi
    • o Optimasi Pemboran
    • o Problema Khusus Pemboran
    • o Peralatan yang Terkait dengan Pelaksanaan Pemboran
  6. Perkiraan Cadangan
    • o Volume In-place
    • o Ketebalan Batuan
    • o Peta Iso Porositas
    • o Peta iso Kapasitas
    • o Recovery Factor (Faktor Perolehan)
  7. Cara Produksi Reservoir Minyak Bumi
    • o Inflow Performance Relationship
    • o Primary Recovery Technology
    • o Enhanced Oil Recovery Technology
    • o Peralatan yang Terkait dengan Fasilitas Produksi di Bawah Permukaan
  8. Fasilitas Produksi di Permukaan
    • o Field Processing Unit
    • o Sistem Pemipaan Minyak Bumi
    • o Peralatan yang Terkait dengan Fasilitas Produksi di Permukaan
  9. Analisa Kinerja Reservoir
    • o Perolehan Reservoir Gas
    • o Perolehan Primer Reservoir Minyak
    • o Efisiensi Perolehan Minyak
    • o Keseimbangan Materi
    • o Peramalan Kinerja Produksi
  10. Prinsip-prinsip Dasar Analisis Keekonomian
    • o Parameter Utama Analisis Keekonomian
    • o Net Present Value
    • o Internal Rate of Return
    • o Pay Out Time
    • o Profit to Invesment Ratio
    • o Beberapa Contoh Kasus

PRE-REQUISITE :

Latar belakang beragam : Sr. Operator, Jr. Operator, Engineer dan Non Engineer

Investasi dan Fasilitas Training

  • Harga : (dilampirkan dalam Brosur penawaran)
  • Fasilitas : Certificate, Training kits, USB 8 GB, Lunch, Coffe Break, Souvenir, City Tour
  • Untuk peserta luar kota disediakan transportasi antar-jemput dari Bandara/Stasiun ke Hotel (berlaku bagi perusahaan yang mengirimkan minimal 2 peserta) Khusus untuk training di Yogyakarta.

 

Permintaan Brosur penawaran Training ( Waktu dan Tempat) silahkan Menghubungi kami.

Catatan :

  • Pelatihan ini dapat di-customized sesuai kebutuhan perusahaan Anda bila diselenggarakan dalam bentuk In-House Training. Untuk permintaan In-House Training dengan jenis topik lainya, silahkan mengirimkan ke alamat email yang tercantum di web kami.
  • Request Training. Jika anda membutuhkan informasi pelatihan yang belum tercantum pada website ini, atau anda ingin memberikan usulan materi yang sesuai dengan tingkat kebutuhan perusahaan anda, silahkan mengirimkan ke alamat email yang tercantum.
  • Bila tidak ada tanggal dan waktu atau yang tercantum sudah kadaluarsa didalam artikel mohon tanyakan kepada kami untuk jadwal terbarunya.

Informasi Jadwal training 2016 | 2017 | 2018 | 2019 | 2020 | 2021 | 2022 | di Yogyakarta, Jakarta, Bandung, Bogor, Surabaya, Malang, Bali, Lombok, Balikpapan, Makassar, Medan, Batam, Riau, Pontianak, Semarang, Solo, Manado, dan Kota-kota lainnya