Jadwal Training Oil and Gas 2018

Informasi Jadwal Training Oil and Gas 2018

01 OGE 101 Petroleum Geology for Non Geologists

02 OGE 102 Petroleum Engineering
03 OGE 103 Applied Reservoir Engineering
04 OGE 104 Principles of Carbonate Reservoirs
05 OGE 105 Integrated Production Modeling
06 OGE 106 Geostatistics and Reservoirs Modeling
07 OGE 107 Carbonate Reservoirs and Seismic Characterization
08 OGE 108 Corrosion Control in the Oil and Gas Industry
09 OGE 109 Drilling Fluids in the Oil Industry
10 OGE 110 Well Logging Quality Control
11 OGE 111 Drilling
12 OGE 112A Drilling Supply Chain Management
13 OGE 112B Drilling Supply Chain Management
14 OGE 113 Cased Hole Logging
15 OGE 114 Open Hole Logging
16 OGE 115 Heavy Oil Gathering and Transport System (Oil Movement)
17 OGE 116 Coating Inspection
18 OGE 117 Applied Reservoir Engineering Workshop
19 OGE 118 Fundamentals of Petroleum Geomechanics
20 OGE 119 Petroleum Tanks Measurement
21 OGE 121 Petroleum Project Economics & Risk Analysis
22 OGE 122 Economics of Petroleum Refining
23 OGE 123 Fundamentals of Oil and Gas Industry
24 OGE 124 Electrical Submersible Pumps (ESP) Basic Operations, Design & Optimization
25 OGE 125 Petroleum Refinery Processing
26 OGE 126 Instrumentation and Control Systems in Oil and Gas Industry
27 OGE 127 Electrical Submersible Pumps (ESP) Technology Design and Sizing
28 OGE 128A Gas Chromatography (GC) Techniques
29 OGE 128B Advanced Gas Chromatography Techniques
30 OGE 130 Flow Assurance for Pipeline Systems and pipeline optimization
31 OGE 131 Introduction to HYSYS in Oil and Gas
32 OGE 132 Hi-TAN Number and Solutions
33 OGE 133 Safe Equipment in Hazardous Areas
34 OGE 134 Natural Gas Processing, Conditioning and Handling
35 OGE 135 Clastic Sedimentology Characterization
36 OGE 136 Flow Assurance for Oil and Gas Production System
37 OGE 137 Casing and Cementing
38 OGE 138 Cased Hole Logging: Cement Logging Tools & Data Interpretation
39 OGE 139 Formation Evaluation
40 OGE 140 Oil and Gas Measurement Calculation
41 OGE 141 Surface Facility Production Operations
42 OGE 142 Production Logging in Horizontal Wells
43 OGE 143 Production logging & Reservoir Monitoring
44 OGE 144 Marine Environment Protection
45 OGE 145 Progressing Cavity Pumps (PCP)
46 OGE 146 Amine Gas Sweeting &Sulfur Recovery
47 OGE 147 Natural Gas Processing: Dehydration, Refrigeration and Fractionation
48 OGE 148 Membrane Technology in the Chemical and Petrochemical Industry
49 OGE 149 Safety Equipment in Oil and Gas Industry
50 OGE 150 Industrial Gases and ASU Cryogenics
51 OGE 151 Process Reactor Operation Troubleshooting Start-Up and Shutdown
52 OGE 152 Petroleum Systems Modelling
53 OGE 171 Process Fired Heaters
54 OGE 172 Gas Processing and Conditioning
55 OGE 173 Reservoir Modeling and Data Integration
56 OGE 180 Oil & Gas Gravity Separation
57 OGE 185 Above Ground Storage Tanks Operation, Inspection and Maintenance

 

Permintaan Brosur penawaran Training ( Waktu dan Tempat) silahkan Menghubungi kami

Catatan :

  • Pelatihan ini dapat di-customized sesuai kebutuhan perusahaan Anda bila diselenggarakan dalam bentuk In-House Training. Untuk permintaan In-House Training dengan jenis topik lainya, silahkan mengirimkan ke alamat email yang tercantum di web kami.
  • Request Training. Jika anda membutuhkan informasi pelatihan yang belum tercantum pada website ini, atau anda ingin memberikan usulan materi yang sesuai dengan tingkat kebutuhan perusahaan anda, silahkan mengirimkan ke alamat email yang tercantum.
  • Bila tidak ada tanggal dan waktu atau yang tercantum sudah kadaluarsa didalam artikel mohon tanyakan kepada kami untuk jadwal terbarunya

 

Komunikasi Security Berbasis NLP

Komunikasi Security Berbasis NLP

TUJUAN TRAINING

Setelah mengikuti training ini, peserta ditargetkan :

  • Memahami keberadaan empat jenis komunikasi yang harus dilakukan dan perbedaannya.
  • Mampu mencerna dengan cepat situasi komunikasi yang dihadapinya.
  • Mampu menata cara berkomunikasinya baik dengan customer maupun karyawan sehingga lebih hangat dan bersahabat, tanpa harus kehilangan kewaspadaannya sebagai pengemban tugas pengamanan perusahaan.
  • Mampu melaksanakan komunikasi pengamanan dan emergency dengan sangat
  • efektif.



OUTLINE TRAINING

  1. Introduksi NLP
  2. Rapport building
  3. Meta Model
  4. Milton Model
  5. Mengenali Bahasa Tubuh Dengan Cepat
  6. Tips dan Trik Berkomunikasi Prima


PESERTA YANG DIREKOMENDASIKAN

Security Manager, Security Supervisor dan Security Guard.

Investasi dan Fasilitas Training

  • Harga : (dilampirkan dalam Brosur penawaran)
  • Fasilitas : Certificate, Training kits, USB 8 GB, Lunch, Coffe Break, Souvenir, City Tour
  • Untuk peserta luar kota disediakan transportasi antar-jemput dari Bandara/Stasiun ke Hotel (berlaku bagi perusahaan yang mengirimkan minimal 2 peserta) Khusus untuk training di Yogyakarta.

 

Permintaan Brosur penawaran Training ( Waktu dan Tempat) silahkan Menghubungi kami.

Catatan :

  • Pelatihan ini dapat di-customized sesuai kebutuhan perusahaan Anda bila diselenggarakan dalam bentuk In-House Training. Untuk permintaan In-House Training dengan jenis topik lainya, silahkan mengirimkan ke alamat email yang tercantum di web kami.
  • Request Training. Jika anda membutuhkan informasi pelatihan yang belum tercantum pada website ini, atau anda ingin memberikan usulan materi yang sesuai dengan tingkat kebutuhan perusahaan anda, silahkan mengirimkan ke alamat email yang tercantum.
  • Bila tidak ada tanggal dan waktu atau yang tercantum sudah kadaluarsa didalam artikel mohon tanyakan kepada kami untuk jadwal terbarunya.

Informasi Jadwal training 2016 | 2017 | 2018 | 2019 | 2020 | 2021 | 2022 | di Yogyakarta, Jakarta, Bandung, Bogor, Surabaya, Malang, Bali, Lombok, Balikpapan, Makassar, Medan, Batam, Riau, Pontianak, Semarang, Solo, Manado, dan Kota-kota lainnya

 

FIELD DEVELOPMENT, BUDGETING & RISK ASSESSMENT

FIELD DEVELOPMENT, BUDGETING & RISK ASSESSMENT

DESKRIPSI TRAINING FIELD DEVELOPMENT, BUDGETING & RISK ASSESSMENT

Petroleum Industries in Indonesia are managed by the Government of the Republic of Indonesia, under Law No. 22 / 2001.  Control system built up by BPMIGAS is done through pre control system, current control system and post control system. In the financial scope  those system applied as  auditing system, consist of pre audit, current  audit  and  post  audit. To perform these auditing system, BPMIGAS published a Financial Reporting  Procedures Manual, consists of  Work  Program & Budget Manual, Authorization Financial Expenditures Manual, Financial Quarterly Report Manual  and  POD control system.

Plan of Development (POD) is the key point in the Oil and Gas business of Indonesia Upstream Oil and Gas project. POD is a guideline for the Contractor (KKKS) to operate their project. There is a planning program that describe of project activities during the contract. KKKS also should construct the detail of Program Activities and Budgeting (WP&B), and Authorization for Expenditure (AFE). In the Indonesia PSC Term, WP & B, AFE and POD is the integrated aspect that every “Contractor” should propose to BP. Therefore, between BP Migas and the Contractor should have the same perception all about aspect of POD, AFE and WP&B especially about the basic principle, mechanism and procedure, system and operational guidance.

Associated with development, there are many things to do in the intensification of activities, including a qualitative increase in activity in the field of exploration, both in the form of regional studies, field geology, geophysics, seismic, drilling of exploration and evaluation. In addition, also performed quantitative increase in production as field development, construction of production facilities, reservoir studies and field production ever. Risk Management and Assessment in this condition very important role in the implementation of activities.

TUJUAN TRAINING FIELD DEVELOPMENT, BUDGETING & RISK ASSESSMENT

These 3 days training  program is  intended to gain  more understanding focuses on :

  • Developing proposal of Work Program & Budget (WP & B)
  • Developing proposal of APE & POD for Approval
  • Developing Competitive advantage by improving operation efficiency
  • Analyzing Risk Management aspect in field Development

MATERI TRAINING FIELD DEVELOPMENT, BUDGETING & RISK ASSESSMENT

  1. The Development Process
  2. Financial Budget & Reporting Procedure
  3. Work Program & Budget
  4. Authorization for Expenditure
  5. Financial Reporting
  6. Cost to be Recovered
  7. Entitlement
  8. Government Tax
  9. Cash Settlement

 

PESERTA TRAINING FIELD DEVELOPMENT, BUDGETING & RISK ASSESSMENT

  • Development Planning Team, Cost Projects Controller, Drilling, Production, and Facilities Construction Staff.
  • Tax Staff, Finance Staff, Legal Counsel, Internal Audit Staff
  • Cost Projects Controller, Business Planning Staff, Drilling, Production, and Facilities Construction Staff.
  • Tax Staff, Finance Staff, Legal Counsel, Internal Audit Staff

Investasi dan Fasilitas Training

  • Harga : (dilampirkan dalam Brosur penawaran)
  • Fasilitas : Certificate, Training kits, USB 8 GB, Lunch, Coffe Break, Souvenir, City Tour
  • Untuk peserta luar kota disediakan transportasi antar-jemput dari Bandara/Stasiun ke Hotel (berlaku bagi perusahaan yang mengirimkan minimal 2 peserta) Khusus untuk training di Yogyakarta.

 

Permintaan Brosur penawaran Training ( Waktu dan Tempat) silahkan Menghubungi kami.

Catatan :

  • Pelatihan ini dapat di-customized sesuai kebutuhan perusahaan Anda bila diselenggarakan dalam bentuk In-House Training. Untuk permintaan In-House Training dengan jenis topik lainya, silahkan mengirimkan ke alamat email yang tercantum di web kami.
  • Request Training. Jika anda membutuhkan informasi pelatihan yang belum tercantum pada website ini, atau anda ingin memberikan usulan materi yang sesuai dengan tingkat kebutuhan perusahaan anda, silahkan mengirimkan ke alamat email yang tercantum.
  • Bila tidak ada tanggal dan waktu atau yang tercantum sudah kadaluarsa didalam artikel mohon tanyakan kepada kami untuk jadwal terbarunya.

Informasi Jadwal training 2016 | 2017 | 2018 | 2019 | 2020 | 2021 | 2022 | di Yogyakarta, Jakarta, Bandung, Bogor, Surabaya, Malang, Bali, Lombok, Balikpapan, Makassar, Medan, Batam, Riau, Pontianak, Semarang, Solo, Manado, dan Kota-kota lainnya

 

Kredit Bermasalah

Kredit Bermasalah

DESKRIPSI Kredit Bermasalah

Krisis yang melanda perekonomian Indonesia benar-benar berdampak buruk terhadap kinerja sekto keuangan. Banyak perusahaan yang gagal secara finansial, bahkan tutup dan menanggung kerugian yang tidak sedikit, baik perusahaan dengan skala besar ataupun kecil. Perusahaan tidak saja sulit mendapatkan sumber dana murah, Memberikan pemahaman kepada peserta mengenai faktor yang mempengaruhi kegiatan bisnis kredit komersial bermasalah & macet yang dilakukan bank/Lembaga Pembiayaan beserta upaya solusinya (penyelamatan & likuidasi). Memberikan kemampuan teknis kepada peserta tentang bagaimana mengantisipasi kemungkinan penyebab kredit bermasalah & macetdan bagaimana cara meminimalkan risiko tersebut.



MATERI PELATIHAN MENGATASI KREDIT BERMASALAH

  1. Kredit Bermasalah & Macet:
  2. Tujuan Pemberian Kredit
  3. Mengapa Kredit Bermasalah & Macet
  4. Mengapa Kredit Bermasalah & Macet:
  5. Gejala Dini Penurunan Kualitas Kredit
  6. Tindakan Antisipasi (Correction Action)
  7. Bagaimana Mencegah Kredit Bermasalah & Macet (lanjutan):
  8. Putusan Dilematis : Diselamatkan atau Dilikuidasi
  9. Berbagai Upaya Penanganan Kredit Bermasalah & Macet
  10. Penyelamatan Kredit
  11. Penyelesaian Kredit (Likuidasi)
  12. Supervisi & Monitoring:
  13. Documentation & Administration
  14. Jaminan & Agunan



TARGET PESERTA

Kepala Cabang, Manager /Staff Kredit , Credit Analys, Account Officer, Legal

Investasi dan Fasilitas Training

  • Harga : (dilampirkan dalam Brosur penawaran)
  • Fasilitas : Certificate, Training kits, USB 8 GB, Lunch, Coffe Break, Souvenir, City Tour
  • Untuk peserta luar kota disediakan transportasi antar-jemput dari Bandara/Stasiun ke Hotel (berlaku bagi perusahaan yang mengirimkan minimal 2 peserta) Khusus untuk training di Yogyakarta.

 

Permintaan Brosur penawaran Training ( Waktu dan Tempat) silahkan Menghubungi kami.

Catatan :

  • Pelatihan ini dapat di-customized sesuai kebutuhan perusahaan Anda bila diselenggarakan dalam bentuk In-House Training. Untuk permintaan In-House Training dengan jenis topik lainya, silahkan mengirimkan ke alamat email yang tercantum di web kami.
  • Request Training. Jika anda membutuhkan informasi pelatihan yang belum tercantum pada website ini, atau anda ingin memberikan usulan materi yang sesuai dengan tingkat kebutuhan perusahaan anda, silahkan mengirimkan ke alamat email yang tercantum.
  • Bila tidak ada tanggal dan waktu atau yang tercantum sudah kadaluarsa didalam artikel mohon tanyakan kepada kami untuk jadwal terbarunya.

Informasi Jadwal training 2016 | 2017 | 2018 | 2019 | 2020 | 2021 | 2022 | di Yogyakarta, Jakarta, Bandung, Bogor, Surabaya, Malang, Bali, Lombok, Balikpapan, Makassar, Medan, Batam, Riau, Pontianak, Semarang, Solo, Manado, dan Kota-kota lainnya

 

PVT AND RESERVOIR FLUID ANALYSIS

PVT AND RESERVOIR FLUID ANALYSIS

TRAINING INTRODUCTION PVT AND RESERVOIR FLUID ANALYSIS

Hydrocarbon systems found in petroleum reservoirs are known to display multi-phase behavior over wide ranges of pressure and temperatures. The most important phases which is occur in petroleum reservoirs are: liquid phase (crude oil or condensates) and gas phase (natural gases).  This course will explain the fundamentals of hydrocarbon phase behavior and practical application in reservoir and production engineering. Firstly it will reviews the principles of phase behavior and ilustrate the use of phase diagram in describing the volumetric behavior of single-component, two-component, and multi-component system.

Also it will present numerous mathematical and graphical correlation for estimating physical and critical properties of the undefined petroleum fraction, evaluation of properties of natural gases and introduces their application in Darcy’s equation and material balance equation.  A complete and cohesive independent unit on methods of determining the crude oil physical properties , presents the concept and application of  vapor-liquid phase equilibria, developments and advanced in the field of empirical cubic equation of state and application in petroleum engineering. Details sceheme of splitting and lumping of petroleum-fraction.

Properly understanding the reservoir fluid properties is very significant and are very importance steps  during the entire life of the oil and reservoir developments and operations. This five-day training will provide a comprehensive knowledge and understanding of reservoir fluid properties and application to reservoir and production engineering to keep exellent reservoir and production performance as long as possible.

TRAINING OBJECTIVES PVT AND RESERVOIR FLUID ANALYSIS

  • Refresh the knowledge of the participants on reservoir fluid properties.
  • Understand the basic principles of hydrocarbon phase behavior and it’s application in petroleum engineering.
  • Learn the numerous mathematical and graphical correlation for estimating physical and critical properties of the undefined petroleum fraction
  • Enhance the knowledge on hydrocarbon phase behavior , freservoir fluid properties and application.
  • Gain additional knowledge on reasent technology in reservoir fluid properties calculation and correlation.
  • Knowledge sharing among the participants and instructors

FEATURING THE FOLLOWING SUBEJCTS PVT AND RESERVOIR FLUID ANALYSIS

Basic Phase Behavior

  • Single Component  Systems
  • Two Component  Systems
  • Multy Component  Systems
  • Classification of Reservoir and Reservoir Fluids

Pure Component Physical Properties and Characterizing Undefined Petroleum Fraction

  • General Correlation for Estimating Physical Properties of Hydrocarbon Fraction
  • Critical Compressibility Factors
  • Characterizing Hydrocarbon Heavy Fractions
  • Determining of Physical Properties of Heavy Petroleum Fraction from Correlation

Properties of Natural Gases

  • Behavior of Ideal Gases
  • Ideal Gas Mixtures
  • Properties of Ideal Gas Mixtures
  • Behavior of Real Gases
  • Effect of Non Hydrocarbon Components on the Z-Factor
  • Correction for Non Hydrocarbons
  • Correction for High-Molecular-Weight Gases
  • Direct Calculation of Compressibilty Factors
  • Compressibility of Natural Gases
  • Gas Formation Volume Factor
  • Gas Viscosity
  • Engineering Application of natural gases PVT Properties

Phase Behavior of Crude Oils

  • Crude Oil Density and Specific Gravity
  • Methods for Determining Density of Crude Oils as Unknown Composition
  • Methods for Determining Density of Liquids as Unknown Composition
  • Isothermal Compressibility Coefficient of Undersaturated Crude Oils
  • Density of Undersarurated Crude Oils
  • Gas Solubility
  • Oil Formation Factor of Undersaturated Crude Oils
  • Total Formation Volume Factor
  • Total System Isothermal Compressibility Coefficient
  • Crude Oil Viscosity
  • Bubble Point and Surface Tension
  • Application of the Crude Oil PVT P
  • The Material Balance Equation for Oil Reservoirs

Vapor-Liquid Phase Equilibria

  • Equilibrium Ratio
  • Flash Calculation
  • Application of Equilibrium Ratio in Petroleum Engineering

Equation of State

  • The General ized Form of Equation of State
  • Application of Equation of State for Petroleum Engineering
  • Three-Phase Equilibrium Calculation

Splitting Lumping Schemes of Petroleum Fraction

  • Splitting Schemes
  • Lumping Schemes
  • Simulation of Laboratory PVT Data by Equation of State

Physical Properties of  Crude Oil Determination

  • Density
  • Viscosity
  • Surface Tension
  • Flash Point
  • Pour Point
  • Sulphur Contents
  • Basic Sediment and Water

WHO SHOULD ATTEND

The following category of professionals should attend:

1. Field Young and Senior Operators.

2. Fresh Petroleum, Reservoir, Production and Facility/Process Engineer

3. Geoscientist

4. Asset Management Team members and Business Development Manager

5. Production Operators, Technician, Maintenance and Operation Personnel who is responsible for the Oil and Gas Reservoir development design and implementation

  1. Experienced professional who wants to refresh or broaden their understanding of Oil and Gas Properties in the purposes of fields development.
  2. Other professionals who want a better understanding of the subject

Investasi dan Fasilitas Training

  • Harga : (dilampirkan dalam Brosur penawaran)
  • Fasilitas : Certificate, Training kits, USB 8 GB, Lunch, Coffe Break, Souvenir, City Tour
  • Untuk peserta luar kota disediakan transportasi antar-jemput dari Bandara/Stasiun ke Hotel (berlaku bagi perusahaan yang mengirimkan minimal 2 peserta) Khusus untuk training di Yogyakarta.

 

Permintaan Brosur penawaran Training ( Waktu dan Tempat) silahkan Menghubungi kami.

Catatan :

  • Pelatihan ini dapat di-customized sesuai kebutuhan perusahaan Anda bila diselenggarakan dalam bentuk In-House Training. Untuk permintaan In-House Training dengan jenis topik lainya, silahkan mengirimkan ke alamat email yang tercantum di web kami.
  • Request Training. Jika anda membutuhkan informasi pelatihan yang belum tercantum pada website ini, atau anda ingin memberikan usulan materi yang sesuai dengan tingkat kebutuhan perusahaan anda, silahkan mengirimkan ke alamat email yang tercantum.
  • Bila tidak ada tanggal dan waktu atau yang tercantum sudah kadaluarsa didalam artikel mohon tanyakan kepada kami untuk jadwal terbarunya.

Informasi Jadwal training 2016 | 2017 | 2018 | 2019 | 2020 | 2021 | 2022 | di Yogyakarta, Jakarta, Bandung, Bogor, Surabaya, Malang, Bali, Lombok, Balikpapan, Makassar, Medan, Batam, Riau, Pontianak, Semarang, Solo, Manado, dan Kota-kota lainnya

 

OFFSHORE TECHNOLOGY & PIPELINE INTEGRITY ASSESSMENT

OFFSHORE TECHNOLOGY & PIPELINE INTEGRITY ASSESSMENT

TRAINING DESCRIPTION OFFSHORE TECHNOLOGY & PIPELINE INTEGRITY ASSESSMENT

The recent trend in the oil and gas industry has been towards oil and gas exploration in deep waters. The technology for deep water oil and gas exploration has witnessed tremendous growth. Offshore technology covers all sorts of engineering and technology and so it offers lots of different career opportunities in engineering and science. People entering the offshore industry are likely to be qualified, for instance, as mechanical, marine or structural engineers, naval architects or specialists in electronics and systems control. Alternatively they may be physicists, biologists, geologists or oceanographers. The fields of opportunity for graduate engineers and scientists and for those who have technical or craft qualifications are diverse, but the underlying interest and theme that helps everyone to work together is the sea and the marine business offshore.

TRAINING OBJECTIVES OFFSHORE TECHNOLOGY & PIPELINE INTEGRITY ASSESSMENT

The course provides participants with the essential knowledge and skills for a career in the marine and offshore industry and is designed for career conversion to prepare engineering diploma and degree graduates of other disciplines to broaden their employment prospects in the oil & gas industry.

TRAINING OUTLINE OFFSHORE TECHNOLOGY & PIPELINE INTEGRITY ASSESSMENT

1. Introduction

  • Offshore Platform
  • Briefs History
  • Unique Challenges for Structural Design
  • Decisions That Affect Structural Design

2. Platform Types

  • Fixed Platform Types
  • Floating Platform Types

3. Design Criteria

  • Weight Control
  • Gravity Loads
  • Environmental Loads
  • Accidental Loads
  • Cases

4. Design Loads
5. Structural Analyses and Design
6. Foundation Methods and Design
7. Fabrication
8. Loadout and Transportation

  • Loadout
  • Sea Transportation

9. Offshore Installation
10. Integrity Assessment Methods for Pipelines

  • Benefits of a Pipeline Integrity Management
  • Basis of an Automated PIMS

TRAINING PARTICIPANTS OFFSHORE TECHNOLOGY & PIPELINE INTEGRITY ASSESSMENT

Working professionals or individuals who wish to learn and broaden their employment prospects in the marine and offshore industry

Investasi dan Fasilitas Training

  • Harga : (dilampirkan dalam Brosur penawaran)
  • Fasilitas : Certificate, Training kits, USB 8 GB, Lunch, Coffe Break, Souvenir, City Tour
  • Untuk peserta luar kota disediakan transportasi antar-jemput dari Bandara/Stasiun ke Hotel (berlaku bagi perusahaan yang mengirimkan minimal 2 peserta) Khusus untuk training di Yogyakarta.

 

Permintaan Brosur penawaran Training ( Waktu dan Tempat) silahkan Menghubungi kami.

Catatan :

  • Pelatihan ini dapat di-customized sesuai kebutuhan perusahaan Anda bila diselenggarakan dalam bentuk In-House Training. Untuk permintaan In-House Training dengan jenis topik lainya, silahkan mengirimkan ke alamat email yang tercantum di web kami.
  • Request Training. Jika anda membutuhkan informasi pelatihan yang belum tercantum pada website ini, atau anda ingin memberikan usulan materi yang sesuai dengan tingkat kebutuhan perusahaan anda, silahkan mengirimkan ke alamat email yang tercantum.
  • Bila tidak ada tanggal dan waktu atau yang tercantum sudah kadaluarsa didalam artikel mohon tanyakan kepada kami untuk jadwal terbarunya.

Informasi Jadwal training 2016 | 2017 | 2018 | 2019 | 2020 | 2021 | 2022 | di Yogyakarta, Jakarta, Bandung, Bogor, Surabaya, Malang, Bali, Lombok, Balikpapan, Makassar, Medan, Batam, Riau, Pontianak, Semarang, Solo, Manado, dan Kota-kota lainnya

 

DRILLING ENGINEERING AND WELL PLANING

DRILLING ENGINEERING AND WELL PLANING

SASARAN BELAJAR KURSUS DRILLING ENGINEERING AND WELL PLANING

Setelah menyelesaikan kursus ini diharapkan peserta dapat :

  • Memahami prinsip-prinsip dasar dan berbagai perhitungan sederhana untuk pelaksanaan pemboran sumur-sumur minyak, gas dan reservoir panas bumi, pengembangan pelaksanaan  perhitungan ini untuk meningkatkan kinerja pemboran sumur-sumur di lapangan.
  • Melakukan diagnosis sederhana dan memengerti penyelesaian dan membuat suatu sumur minyak, gas atau panas bumi.
  • Membuat analisis sederhana terhadap data eksplorasi sumuran minyak, gas dan panas bumi, kemudian mampu melakukan perancangan global pemboran  kinerja dan merencanakan pengembangannya.
  • Melakukan perhitungan-perhitungan kuantitatip sederhana untuk perencanaan lumpur pemboran, semen, hidrolika, well control.
  • Mempergunakan pengetahuan dalam perancangan pemboran tegak, untuk keperluan perancangan pemboran sumur miring, sumur horizontal baik dengan teknologi overbalance maupun underbalance.

 

MATERI KURSUS DRILLING ENGINEERING AND WELL PLANING

  •  Introduction : Rotary Drilling Operations
  •  Steps to drilling a well
  • Types of rigs
  • Rig Components
  • Rig Systems
  • Rheology of Drilling and Completion Fluids
  • Equations and Inflow Performance RelationshipFunctions of Drilling/Completion
  •    Fluids
  • Fluid Types,
  • Fluid Models
  •  Introduction to Rotary Viscometer
  •  Other Testing Equipment
  • Objectives of Monitoring Fluids
  •  Mud System
  • General Equations and ConceptsDiagnostic tests
  • Water based muds
  • Oil based muds
  • Additives
  • Mud handling system
  •   Cementing
  •  Tubing DesignFunctions of cement
  • Cement Types
  • Cement Additives
  •  Oil Field Tubulars and Hydraulics
  • Drill string
  • Casing and tubing
  • Casing classification
  •  Stresses on casing
  • Casing setting depth
  • Burst and collapse calculations
  • Wellheads
  • Drilling System – Pressure Loss Calculations
  • Hydrostatics
  • Buoyancy
  • Flow through pipes and annuli
  • Flow path
  • Pressure loss calculations
  •  Drilling System – Bit & Nozzles
  •  Hydrostatics Bit Types
  • Bit Parts
  • Bit Classification
  • Bit Nozzles
  • Introduction to Well Control
  • Hydrostatics Definitions
  •  Causes of kicks
  • Kick indicators
  • Shut-in procedure
  • Well Kill Procedures
  • Directional Drilling
  •  Reasons for directional wells
  • Planning Trajectory
  • Kickoff Methods
  •  Survey Methods
  • Survey Calculations
  • Hole Assemblies

 

PRE-REQUISITE :

  • Latar belakang  : Operator/Senior Operator/Engineer/Non Engineer

Investasi dan Fasilitas Training

  • Harga : (dilampirkan dalam Brosur penawaran)
  • Fasilitas : Certificate, Training kits, USB 8 GB, Lunch, Coffe Break, Souvenir, City Tour
  • Untuk peserta luar kota disediakan transportasi antar-jemput dari Bandara/Stasiun ke Hotel (berlaku bagi perusahaan yang mengirimkan minimal 2 peserta) Khusus untuk training di Yogyakarta.

 

Permintaan Brosur penawaran Training ( Waktu dan Tempat) silahkan Menghubungi kami.

Catatan :

  • Pelatihan ini dapat di-customized sesuai kebutuhan perusahaan Anda bila diselenggarakan dalam bentuk In-House Training. Untuk permintaan In-House Training dengan jenis topik lainya, silahkan mengirimkan ke alamat email yang tercantum di web kami.
  • Request Training. Jika anda membutuhkan informasi pelatihan yang belum tercantum pada website ini, atau anda ingin memberikan usulan materi yang sesuai dengan tingkat kebutuhan perusahaan anda, silahkan mengirimkan ke alamat email yang tercantum.
  • Bila tidak ada tanggal dan waktu atau yang tercantum sudah kadaluarsa didalam artikel mohon tanyakan kepada kami untuk jadwal terbarunya.

Informasi Jadwal training 2016 | 2017 | 2018 | 2019 | 2020 | 2021 | 2022 | di Yogyakarta, Jakarta, Bandung, Bogor, Surabaya, Malang, Bali, Lombok, Balikpapan, Makassar, Medan, Batam, Riau, Pontianak, Semarang, Solo, Manado, dan Kota-kota lainnya

 

PENGELOLAAN LAPANGAN MATURE, TEKNIK & STRATEGI MENINGKATKAN PRODUKSI

PENGELOLAAN LAPANGAN MATURE, TEKNIK & STRATEGI MENINGKATKAN PRODUKSI

SASARAN BELAJAR :

Setelah menyelesaikan kursus ini diharapkan peserta dapat :

  • Memahami prinsip-prinsip dasar perhitungan dan melakukan optimisasi pada saat operasi produksi sumur-sumur dan reservoir minyak, gas dilaksanakan, pengembangan pelaksannaan optimisasi produksi ini untuk meningkatkan kinerja produksi sumuran dan lapangan mature.
  • Melakukan diagnosis sederhana dan memengerti penyelesaian permasalahan dalam operasi produksi sumur-sumur minyak dan gas bumi lapangan mature dan mencari strategi meningkatkan produksinya.
  • Membuat analisis sederhana terhadap data sumuran minyak, gas dan panas bumi, melakukan peramalan kinerja dan merencanakan pengembangan operasi produksi lapangan mature.
  • Melakukan perhitungan-perhitungan kuantitatip sederhana dari seluruh data perolehan data tubing, flowline, choke, perforasi, gravel-pack, sub-surface savety valve pada sumuran, merencanakan pengembangannya dengan memperhitungan kemampuan masing-masing sumuran pada lapangan mature.
  • Mempergunakan pengetahuan operasi produksi untuk keperluan penyelesaian permasalahan sumur seperti : pada saat penyemenan, penanganan scale, pasir, korosi dan damage yang mungkin terjadi pada sumuran minyak dan gas bumi lapangan mature.
  • Memahami prinsip-prinsip dasar perancangan : penyemenan, workover, stimulasi sumuran dengan  pengasaman dan perekahan hidrololik, perencanaan work over dan lain-lain untuk lapangan mature.


MATERI KURSUS PENGELOLAAN LAPANGAN MATURE :

  •   Geologic Considerations in producing Operation
  • Introduction
  • Sandstone Reservoirs
  • Geologic Factors Affecting Reservoir Properties in Sandstone
  • Application of Geologic concepts in Specific Sandstone
  • Carbonate Reservoirs
  •   Application of Geologic Concepts in Carbonate Reservoirs
  • Reservoir Considerations in Well Completions
  •   Introduction
  •   Hydrocarbon Properties of Oil and Gas
  • Recommendations of Obtaining Good Test Data
  •   “Eyeball” Interpretation of Pressure Charts
  • Well Completion Design
  •   Factors Influencing Well Completion Design
  • Conventional Tubular Configuration
  •   Unconventional Tubular Configurations
  •   Sizing Production Tubular
  •   Completion Interval
  •   Permanent Well Completions (PWC)
  • Tubingless Completion
  • Tubing Strings,Packers,Subsurface Control Equipment
  • Tubing Strings
  •   Steel Grades
  • Tubing Connections
  • Makeup of API Threaded connection
  •   Design of Tubing Strings
  • High Strength Tubing
  •   Physical Properties of Steel
  • Sensitivities of High Strength Tubing
  •   Tubing Inspection
  •   Tubing Handling Practices
  •   Equipment for Use With-Strength Tubing
  •   Tubing Running Practices
  • API Publication List
  • Packers and Subsurface Control Equipment
  • Production Packers
  • Subsurface Control Equipment
  •  Perforating Oil and Gas Wells
  •   Introduction
  •   Types of Perforators
  • Evaluation of Perforator Performance
  •   Factors  Aftecting Gun Perforating Results
  • Perforating in a Clean Fluid with Differential Pressure Into Wellbore
  • A Comparison between the GEO-VANN System and Other Perforating Methods in Wells Equipped with Packers
  • Completion and Workover Fluids
  • Functions-Requirements-Selection Criteria
  • Formation Damage Related to Solids
  • Oil Fluids-Practical Application
  • Conventional Water-Base Mud
  • Oil Base or Invert-Emulsion Muds
  • Foam
  • Perforating Fluids
  • Packer Fluids
  • Well Killing
  •  Production Logging
  • Introduction
  •   Logging Device
  •   Application of Production logging
  • Field Examples of Production Logging Techniques
  • Primary Cement Evaluation
  •  Problem Well Analysis
  • Problem Wells
  • Problem Well Analysis Checklist
  • Parafin and Asphaltene
  • Introduction
  • Paraffin and Asphaltene Chemistry
  • Deposition Mechanisms
  • Removal of Wax Deposits
  • Preventing or Decreasing Wax Deposition
  • Design of Wax Control
  • Squeeze Cementing-Remedial Cementing
  •   Introduction
  • Theoretical Considerations
  • Practical Considerations
  • Special Squeeze Cementing Situations
  • Planning a Squeeze Cement Job
  • Normal Operational Procedures
  • Other Operational Procedures
  • Plug-Back Operations
  • Special Cement Systems
  • Sand Control
  •   Introduction
  • Reduction of Drag Force
  • Mechanical Methods of Sand Control
  •   Practical Considerations in Gravel Packing
  • Use of screen Without Gravel
  • Resin Consolidation Methods
  • Formation Damage
  •   Introduction
  • Basic Causes of Damage
  • Classification of Damage Mechanisms
  •   Reduced Absolute Permeability
  •   Increased Fluid Viscosity (Emulsion)
  •   Diagnosis of Formation Damage
  • Surfactants for Well Treatments
  • Characteristics of Surfactants
  • Use and Action of Surfactant
  • Formation Damage Susceptible to Surfactant Treatment
  •   Preventing or Removing Damage
  •   Well Stimulation With Surfactants
  • Increasing Effectiveness of Rod Pumping
  • Prevention of Well Damage
  • Acidizing
  • Acids Used in Well Stimulation
  •   Acid Additives
  • Carbonate Acidizing
  •   Acidizing Techniques for Caronat Formations
  •   Sandstone Acidizing
  •   Potential Safety Hazard in Acidizing
  • Hydraulic Fracturing
  •   Introduction
  •   Mechanics of Fracturing
  •   Production Increase from Fracturing
  • Propping the Fracture
  • Frac Fluids
  •   Frac Job Design
  •   Frac Job Evaluation Techniques
  •  Scale Deposition,Removal,and Prevention
  •   Introduction
  • Causes of Scale Deposition
  •   Prediction and Identification of Scale
  •   Scale Removal
  •   Scale Prevention
  • Corrosion Control
  • The Corrosion Process
  •   Detection and Measurement of Corrosion
  •   Corrosion Control
  • Workover and Completion Rigs Workover System
  • Conventional Production Rigs
  • Non-Conventional Workovers System
  •   Concentric Tubing Workovers
  • Workover Planning
  • Reasons for Workover
  • Workover to Alleviate Formation Damage
  • Workover for Low Permeability Well
  • Workover of Wells in Partially Pressure-Depleted Reservoirs
  •   Workover to Reduces Water Production in Oil and Gas Wells
  •   Workover to Reduces Gas Production in Oil Wells
  • Workover for Sand Control
  •   Workover to Repair Mechanical Failure
  • Workover to Change Zones or Reservoirs
  •   Workover to Multicomplete
  • Workover to Increase Production in Well Producing High Viscosity (Low Gravity) Oil
  • Workover Economics

PRE-REQUISITE :

  •   Latar belakang  : Operator, Senior Operator, Engineer/Non Engineer

 

Investasi dan Fasilitas Training

  • Harga : (dilampirkan dalam Brosur penawaran)
  • Fasilitas : Certificate, Training kits, USB 8 GB, Lunch, Coffe Break, Souvenir, City Tour
  • Untuk peserta luar kota disediakan transportasi antar-jemput dari Bandara/Stasiun ke Hotel (berlaku bagi perusahaan yang mengirimkan minimal 2 peserta) Khusus untuk training di Yogyakarta.

 

Permintaan Brosur penawaran Training ( Waktu dan Tempat) silahkan Menghubungi kami.

Catatan :

  • Pelatihan ini dapat di-customized sesuai kebutuhan perusahaan Anda bila diselenggarakan dalam bentuk In-House Training. Untuk permintaan In-House Training dengan jenis topik lainya, silahkan mengirimkan ke alamat email yang tercantum di web kami.
  • Request Training. Jika anda membutuhkan informasi pelatihan yang belum tercantum pada website ini, atau anda ingin memberikan usulan materi yang sesuai dengan tingkat kebutuhan perusahaan anda, silahkan mengirimkan ke alamat email yang tercantum.
  • Bila tidak ada tanggal dan waktu atau yang tercantum sudah kadaluarsa didalam artikel mohon tanyakan kepada kami untuk jadwal terbarunya.

Informasi Jadwal training 2016 | 2017 | 2018 | 2019 | 2020 | 2021 | 2022 | di Yogyakarta, Jakarta, Bandung, Bogor, Surabaya, Malang, Bali, Lombok, Balikpapan, Makassar, Medan, Batam, Riau, Pontianak, Semarang, Solo, Manado, dan Kota-kota lainnya

 

TES SUMUR DAN ANALISA TEKANAN

TES SUMUR DAN ANALISA TEKANAN

SASARAN BELAJAR

Setelah menyelesaikan kursus ini diharapkan peserta dapat :

  • Memahami prinsip dasar operasi dan interpretasi tes sumur
  • Melakukan interpretasi data tes sumur
  • Membuat perencanaan atau desain sustu tes sumur
  • Membuat atau menggunakan program-program kecil yang membantu dalam interpretasi data tes sumur

MATERI KURSUS TES SUMUR DAN ANALISA TEKANAN

Pengenalan Teknik Perminyakan

Dasar-Dasar Tes Sumur

  • Prinsip Dasar Tes Sumur
  • Aliran Fluida Dalam Media Berpori
  • Macam-Macam Tes Sumur

Pressure Drawdown Test

  • Analisis Pressure Drawdown Pada Periode Transien
  •  Analisis Pressure Drawdown Pada Periode Transien Lanjut
  • Analisis Pressure Drawdown Pada Periode Semi-Steady State

Pressure Buildup Test

  • Prinsip Superposisi
  •  Pressure Buildup Ideal
  • Actual Buildup Case
  • Lamanya Pengaruh Wellbore Storage
  •  Penentuan Tekanan Rata-Rata
  • Pressure Buildup Untuk Sistem Lebih Dari Satu Fasa
  •  Analisis Pressure Buildup Dibawah Pengaruh Redistribusi Fasa Pada Lubang Bor

Multi Rate Test

  • Persamaan Dasar Untuk Multiple Rate Test
  •  Two Rate Flow Test
  • Deliverability Test
  • Variable Injection Rate Test

Multiple Well Test

  •  Interference Test
  • Interference Test Pada Reservoir Terbatas (Bounded)
  • Pulse Testing
  • Analisis Pulse Test Dengan Metode Stegemeier

Analisis Tes Sumur Dengan Menggunakan Type Curve

  •  Prinsip Analisis Type Curve
  • Ramey’s Type Curve dan McKinley Type Curve

Tes Sumur Sumur Gas

  •  Sifat-Sifat Gas
  • Analisis Tes Sumur Pada Sumur Gas

Injection Well Testing

  •  Injectivity Analysis
  • Falloff Test Analysis
  • Step-Rate Testing

Drill Stem Testing

  • Analisis DST

Tes Sumur Untuk Reservoir Rekah Buatan

  • Transien Tekanan Pada Hydraulically Vertical Fractured Reservoir
  • Efek Skin, Wellbore Storage dan Geometri Rekahan Terhadap Respon Tekanan
  • Finite Fracture Conductivity
  • Massive Hydraulic Fracturing dan Pengujian Pada Tekanan Konstan

Tes Sumur Untuk Reservoir Rekah Alami

  • Kelakuan Transien Tekanan Pada Reservoir Rekah Alami
  • Efek Incomplete Test
  • Pendekatan Gradient Flow Model
  • Analisis Transien Tekanan Pada Reservoir Rekah Alami Dibawah Pengaruh Alirab Spherical

Interpretasi Data Tes Sumur Horizontal

  •   Analisis Transien Tekanan Sumur Horizontal Secara Grafis
  •  Analisis Transien Tekanan Sumur Horizontal Dengan Type Curve Matching

Well Sounder

  • Analisis Data Well Sounder

TARGET PESERTA :

  • Operator/Sr. Operator/Jr. Engineer/Non-Engineer

PRE-REQUISITE

  • Mempunyai pengetahuan dasar teknik perminyakan
  • Mempunyai pengetahuan dasar teknik reservoir dan produksi

Investasi dan Fasilitas Training

  • Harga : (dilampirkan dalam Brosur penawaran)
  • Fasilitas : Certificate, Training kits, USB 8 GB, Lunch, Coffe Break, Souvenir, City Tour
  • Untuk peserta luar kota disediakan transportasi antar-jemput dari Bandara/Stasiun ke Hotel (berlaku bagi perusahaan yang mengirimkan minimal 2 peserta) Khusus untuk training di Yogyakarta.

 

Permintaan Brosur penawaran Training ( Waktu dan Tempat) silahkan Menghubungi kami.

Catatan :

  • Pelatihan ini dapat di-customized sesuai kebutuhan perusahaan Anda bila diselenggarakan dalam bentuk In-House Training. Untuk permintaan In-House Training dengan jenis topik lainya, silahkan mengirimkan ke alamat email yang tercantum di web kami.
  • Request Training. Jika anda membutuhkan informasi pelatihan yang belum tercantum pada website ini, atau anda ingin memberikan usulan materi yang sesuai dengan tingkat kebutuhan perusahaan anda, silahkan mengirimkan ke alamat email yang tercantum.
  • Bila tidak ada tanggal dan waktu atau yang tercantum sudah kadaluarsa didalam artikel mohon tanyakan kepada kami untuk jadwal terbarunya.

Informasi Jadwal training 2016 | 2017 | 2018 | 2019 | 2020 | 2021 | 2022 | di Yogyakarta, Jakarta, Bandung, Bogor, Surabaya, Malang, Bali, Lombok, Balikpapan, Makassar, Medan, Batam, Riau, Pontianak, Semarang, Solo, Manado, dan Kota-kota lainnya

 

RESERVOIR FLUID ANALYSIS

RESERVOIR FLUID ANALYSIS

TRAINING INTRODUCTION RESERVOIR FLUID ANALYSIS

Hydrocarbon systems found in petroleum reservoirs are known to display multi-phase behavior over wide ranges of pressure and temperatures. The most important phases which is occur in petroleum reservoirs are: liquid phase (crude oil or condensates) and gas phase (natural gases).  This course will explain the fundamentals of hydrocarbon phase behavior and practical application in reservoir and production engineering. Firstly it will reviews the principles of phase behavior and ilustrate the use of phase diagram in describing the volumetric behavior of single-component, two-component, and multi-component system.

Also it will present numerous mathematical and graphical correlation for estimating physical and critical properties of the undefined petroleum fraction, evaluation of properties of natural gases and introduces their application in Darcy’s equation and material balance equation.  A complete and cohesive independent unit on methods of determining the crude oil physical properties , presents the concept and application of  vapor-liquid phase equilibria, developments and advanced in the field of empirical cubic equation of state and application in petroleum engineering. Details sceheme of splitting and lumping of petroleum-fraction.

Properly understanding the reservoir fluid properties is very significant and are very importance steps  during the entire life of the oil and reservoir developments and operations. This five-day training will provide a comprehensive knowledge and understanding of reservoir fluid properties and application to reservoir and production engineering to keep exellent reservoir and production performance as long as possible.

TRAINING OBJECTIVES RESERVOIR FLUID ANALYSIS

  • Refresh the knowledge of the participants on reservoir fluid properties.
  • Understand the basic principles of hydrocarbon phase behavior and it’s application in petroleum engineering.
  • Learn the numerous mathematical and graphical correlation for estimating physical and critical properties of the undefined petroleum fraction
  • Enhance the knowledge on hydrocarbon phase behavior , freservoir fluid properties and application.
  • Gain additional knowledge on reasent technology in reservoir fluid properties calculation and correlation.
  • Knowledge sharing among the participants and instructors

TRAINING OUTLINE RESERVOIR FLUID ANALYSIS

FEATURING THE FOLLOWING SUBEJCTS

1.      Basic Phase Behavior

  • Single Component Systems
  • Two Component Systems
  • Multy Component Systems
  • Classification of Reservoir and Reservoir Fluids

2.      Pure Component Physical Properties and Characterizing Undefined Petroleum Fraction

  • General Correlation for Estimating Physical Properties of Hydrocarbon Fraction
  • Critical Compressibility Factors
  • Characterizing Hydrocarbon Heavy Fractions
  • Determining of Physical Properties of Heavy Petroleum Fraction from Correlation

3.      Properties of Natural Gases

  • Behavior of Ideal Gases
  • Ideal Gas Mixtures
  • Properties of Ideal Gas Mixtures
  • Behavior of Real Gases
  • Effect of Non Hydrocarbon Components on the Z-Factor
  • Correction for Non Hydrocarbons
  • Correction for High-Molecular-Weight Gases
  • Direct Calculation of Compressibilty Factors
  • Compressibility of Natural Gases
  • Gas Formation Volume Factor
  • Gas Viscosity
  • Engineering Application of natural gases PVT Properties

4.      Phase Behavior of Crude Oils

  • Crude Oil Density and Specific Gravity
  • Methods for Determining Density of Crude Oils as Unknown Composition
  • Methods for Determining Density of Liquids as Unknown Composition
  • Isothermal Compressibility Coefficient of Undersaturated Crude Oils
  • Density of Undersarurated Crude Oils
  • Gas Solubility
  • Oil Formation Factor of Undersaturated Crude Oils
  • Total Formation Volume Factor
  • Total System Isothermal Compressibility Coefficient
  • Crude Oil Viscosity
  • Bubble Point and Surface Tension
  • Application of the Crude Oil PVT P
  • The Material Balance Equation for Oil Reservoirs

5.      Vapor-Liquid Phase Equilibria

  • Equilibrium Ratio
  • Flash Calculation
  • Application of Equilibrium Ratio in Petroleum Engineering

6.      Equation of State

  • The General ized Form of Equation of State
  • Application of Equation of State for Petroleum Engineering
  • Three-Phase Equilibrium Calculation

7.      Splitting Lumping Schemes of Petroleum Fraction

  • Splitting Schemes
  • Lumping Schemes
  • Simulation of Laboratory PVT Data by Equation of State

WHO SHOULD ATTEND

The following category of professionals should attend:

  1. Field Young and Senior Operators.
  2. Fresh Petroleum, Reservoir, Production and Facility/Process Engineer
  3. Geoscientist
  4. Asset Management Team members and Business Development Manager
  5. Production Operators, Technician, Maintenance and Operation Personnel who is responsible for the Oil and Gas Reservoir development design and implementation
  6. Experienced professional who wants to refresh or broaden their understanding of Oil and Gas Properties in the purposes of fields development.
  7. Other professionals who want a better understanding of the subject

Investasi dan Fasilitas Training

  • Harga : (dilampirkan dalam Brosur penawaran)
  • Fasilitas : Certificate, Training kits, USB 8 GB, Lunch, Coffe Break, Souvenir, City Tour
  • Untuk peserta luar kota disediakan transportasi antar-jemput dari Bandara/Stasiun ke Hotel (berlaku bagi perusahaan yang mengirimkan minimal 2 peserta) Khusus untuk training di Yogyakarta.

 

Permintaan Brosur penawaran Training ( Waktu dan Tempat) silahkan Menghubungi kami.

Catatan :

  • Pelatihan ini dapat di-customized sesuai kebutuhan perusahaan Anda bila diselenggarakan dalam bentuk In-House Training. Untuk permintaan In-House Training dengan jenis topik lainya, silahkan mengirimkan ke alamat email yang tercantum di web kami.
  • Request Training. Jika anda membutuhkan informasi pelatihan yang belum tercantum pada website ini, atau anda ingin memberikan usulan materi yang sesuai dengan tingkat kebutuhan perusahaan anda, silahkan mengirimkan ke alamat email yang tercantum.
  • Bila tidak ada tanggal dan waktu atau yang tercantum sudah kadaluarsa didalam artikel mohon tanyakan kepada kami untuk jadwal terbarunya.

Informasi Jadwal training 2016 | 2017 | 2018 | 2019 | 2020 | 2021 | 2022 | di Yogyakarta, Jakarta, Bandung, Bogor, Surabaya, Malang, Bali, Lombok, Balikpapan, Makassar, Medan, Batam, Riau, Pontianak, Semarang, Solo, Manado, dan Kota-kota lainnya