PENGELOLAAN LAPANGAN MATURE, TEKNIK & STRATEGI MENINGKATKAN PRODUKSI

PENGELOLAAN LAPANGAN MATURE, TEKNIK & STRATEGI MENINGKATKAN PRODUKSI

SASARAN BELAJAR :

Setelah menyelesaikan kursus ini diharapkan peserta dapat :

  • Memahami prinsip-prinsip dasar perhitungan dan melakukan optimisasi pada saat operasi produksi sumur-sumur dan reservoir minyak, gas dilaksanakan, pengembangan pelaksannaan optimisasi produksi ini untuk meningkatkan kinerja produksi sumuran dan lapangan mature.
  • Melakukan diagnosis sederhana dan memengerti penyelesaian permasalahan dalam operasi produksi sumur-sumur minyak dan gas bumi lapangan mature dan mencari strategi meningkatkan produksinya.
  • Membuat analisis sederhana terhadap data sumuran minyak, gas dan panas bumi, melakukan peramalan kinerja dan merencanakan pengembangan operasi produksi lapangan mature.
  • Melakukan perhitungan-perhitungan kuantitatip sederhana dari seluruh data perolehan data tubing, flowline, choke, perforasi, gravel-pack, sub-surface savety valve pada sumuran, merencanakan pengembangannya dengan memperhitungan kemampuan masing-masing sumuran pada lapangan mature.
  • Mempergunakan pengetahuan operasi produksi untuk keperluan penyelesaian permasalahan sumur seperti : pada saat penyemenan, penanganan scale, pasir, korosi dan damage yang mungkin terjadi pada sumuran minyak dan gas bumi lapangan mature.
  • Memahami prinsip-prinsip dasar perancangan : penyemenan, workover, stimulasi sumuran dengan  pengasaman dan perekahan hidrololik, perencanaan work over dan lain-lain untuk lapangan mature.


MATERI KURSUS PENGELOLAAN LAPANGAN MATURE :

  •   Geologic Considerations in producing Operation
  • Introduction
  • Sandstone Reservoirs
  • Geologic Factors Affecting Reservoir Properties in Sandstone
  • Application of Geologic concepts in Specific Sandstone
  • Carbonate Reservoirs
  •   Application of Geologic Concepts in Carbonate Reservoirs
  • Reservoir Considerations in Well Completions
  •   Introduction
  •   Hydrocarbon Properties of Oil and Gas
  • Recommendations of Obtaining Good Test Data
  •   “Eyeball” Interpretation of Pressure Charts
  • Well Completion Design
  •   Factors Influencing Well Completion Design
  • Conventional Tubular Configuration
  •   Unconventional Tubular Configurations
  •   Sizing Production Tubular
  •   Completion Interval
  •   Permanent Well Completions (PWC)
  • Tubingless Completion
  • Tubing Strings,Packers,Subsurface Control Equipment
  • Tubing Strings
  •   Steel Grades
  • Tubing Connections
  • Makeup of API Threaded connection
  •   Design of Tubing Strings
  • High Strength Tubing
  •   Physical Properties of Steel
  • Sensitivities of High Strength Tubing
  •   Tubing Inspection
  •   Tubing Handling Practices
  •   Equipment for Use With-Strength Tubing
  •   Tubing Running Practices
  • API Publication List
  • Packers and Subsurface Control Equipment
  • Production Packers
  • Subsurface Control Equipment
  •  Perforating Oil and Gas Wells
  •   Introduction
  •   Types of Perforators
  • Evaluation of Perforator Performance
  •   Factors  Aftecting Gun Perforating Results
  • Perforating in a Clean Fluid with Differential Pressure Into Wellbore
  • A Comparison between the GEO-VANN System and Other Perforating Methods in Wells Equipped with Packers
  • Completion and Workover Fluids
  • Functions-Requirements-Selection Criteria
  • Formation Damage Related to Solids
  • Oil Fluids-Practical Application
  • Conventional Water-Base Mud
  • Oil Base or Invert-Emulsion Muds
  • Foam
  • Perforating Fluids
  • Packer Fluids
  • Well Killing
  •  Production Logging
  • Introduction
  •   Logging Device
  •   Application of Production logging
  • Field Examples of Production Logging Techniques
  • Primary Cement Evaluation
  •  Problem Well Analysis
  • Problem Wells
  • Problem Well Analysis Checklist
  • Parafin and Asphaltene
  • Introduction
  • Paraffin and Asphaltene Chemistry
  • Deposition Mechanisms
  • Removal of Wax Deposits
  • Preventing or Decreasing Wax Deposition
  • Design of Wax Control
  • Squeeze Cementing-Remedial Cementing
  •   Introduction
  • Theoretical Considerations
  • Practical Considerations
  • Special Squeeze Cementing Situations
  • Planning a Squeeze Cement Job
  • Normal Operational Procedures
  • Other Operational Procedures
  • Plug-Back Operations
  • Special Cement Systems
  • Sand Control
  •   Introduction
  • Reduction of Drag Force
  • Mechanical Methods of Sand Control
  •   Practical Considerations in Gravel Packing
  • Use of screen Without Gravel
  • Resin Consolidation Methods
  • Formation Damage
  •   Introduction
  • Basic Causes of Damage
  • Classification of Damage Mechanisms
  •   Reduced Absolute Permeability
  •   Increased Fluid Viscosity (Emulsion)
  •   Diagnosis of Formation Damage
  • Surfactants for Well Treatments
  • Characteristics of Surfactants
  • Use and Action of Surfactant
  • Formation Damage Susceptible to Surfactant Treatment
  •   Preventing or Removing Damage
  •   Well Stimulation With Surfactants
  • Increasing Effectiveness of Rod Pumping
  • Prevention of Well Damage
  • Acidizing
  • Acids Used in Well Stimulation
  •   Acid Additives
  • Carbonate Acidizing
  •   Acidizing Techniques for Caronat Formations
  •   Sandstone Acidizing
  •   Potential Safety Hazard in Acidizing
  • Hydraulic Fracturing
  •   Introduction
  •   Mechanics of Fracturing
  •   Production Increase from Fracturing
  • Propping the Fracture
  • Frac Fluids
  •   Frac Job Design
  •   Frac Job Evaluation Techniques
  •  Scale Deposition,Removal,and Prevention
  •   Introduction
  • Causes of Scale Deposition
  •   Prediction and Identification of Scale
  •   Scale Removal
  •   Scale Prevention
  • Corrosion Control
  • The Corrosion Process
  •   Detection and Measurement of Corrosion
  •   Corrosion Control
  • Workover and Completion Rigs Workover System
  • Conventional Production Rigs
  • Non-Conventional Workovers System
  •   Concentric Tubing Workovers
  • Workover Planning
  • Reasons for Workover
  • Workover to Alleviate Formation Damage
  • Workover for Low Permeability Well
  • Workover of Wells in Partially Pressure-Depleted Reservoirs
  •   Workover to Reduces Water Production in Oil and Gas Wells
  •   Workover to Reduces Gas Production in Oil Wells
  • Workover for Sand Control
  •   Workover to Repair Mechanical Failure
  • Workover to Change Zones or Reservoirs
  •   Workover to Multicomplete
  • Workover to Increase Production in Well Producing High Viscosity (Low Gravity) Oil
  • Workover Economics

PRE-REQUISITE :

  •   Latar belakang  : Operator, Senior Operator, Engineer/Non Engineer

 

Investasi dan Fasilitas Training

  • Harga : (dilampirkan dalam Brosur penawaran)
  • Fasilitas : Certificate, Training kits, USB 8 GB, Lunch, Coffe Break, Souvenir, City Tour
  • Untuk peserta luar kota disediakan transportasi antar-jemput dari Bandara/Stasiun ke Hotel (berlaku bagi perusahaan yang mengirimkan minimal 2 peserta) Khusus untuk training di Yogyakarta.

 

Permintaan Brosur penawaran Training ( Waktu dan Tempat) silahkan Menghubungi kami.

Catatan :

  • Pelatihan ini dapat di-customized sesuai kebutuhan perusahaan Anda bila diselenggarakan dalam bentuk In-House Training. Untuk permintaan In-House Training dengan jenis topik lainya, silahkan mengirimkan ke alamat email yang tercantum di web kami.
  • Request Training. Jika anda membutuhkan informasi pelatihan yang belum tercantum pada website ini, atau anda ingin memberikan usulan materi yang sesuai dengan tingkat kebutuhan perusahaan anda, silahkan mengirimkan ke alamat email yang tercantum.
  • Bila tidak ada tanggal dan waktu atau yang tercantum sudah kadaluarsa didalam artikel mohon tanyakan kepada kami untuk jadwal terbarunya.

Informasi Jadwal training 2016 | 2017 | 2018 | 2019 | 2020 | 2021 | 2022 | di Yogyakarta, Jakarta, Bandung, Bogor, Surabaya, Malang, Bali, Lombok, Balikpapan, Makassar, Medan, Batam, Riau, Pontianak, Semarang, Solo, Manado, dan Kota-kota lainnya

 

PRODUCTION OPERATION AND PROBLEM SOLVING

PRODUCTION OPERATION AND PROBLEM SOLVING

COURSE TARGETS :

After completing this course participants are expected to be able to:

  • Comprehend basic principles of calculation and conduct optimization when wells production operations, oil wells, gas and geothermal reservoir implemented, develop this production optimization implementation to improve wells and fields performance and production.
  • Conduct simple diagnosis and comprehend settlement problems on production wells operation of, oil wells and gas and geothermal reservoir.
  • Create a simple analysis of wells oil, gas and geothermal data, forecast performance and plan production operations development
  • Conduct simple quantitative calculations entire acquisition data: tubing, flowline, chokes, perforation, Gravel-pack, sub-surface safety, wells valve, plan its development by considering capability from each well.
  • Practice knowledge of production operations for settlement problems occur when cementation process, handling scale, sand, corrosion and damage of oil and gas wells.n
  • Understanding basic principles on design: cementation, workover, wells stimulation with acidizig and hydraulics rupture, planning workover, etc.

 

OUTLINE COURSE PRODUCTION OPERATION AND PROBLEM SOLVING

Geologic Considerations in producing Operation

  • Introduction
  • Sandstone Reservoirs
  • Geologic Factors Affecting Reservoir Properties in Sandstone
  • Application of Geologic concepts in Specific Sandstone
  • Carbonate Reservoirs
  • Application of Geologic Concepts in Carbonate Reservoirs

Reservoir Considerations in Well Completions

  • Introduction
  • Hydrocarbon Properties of Oil and Gas
  • Recommendations of Obtaining Good Test Data
  • “Eyeball” Interpretation of Pressure Charts

Primary Cementing

  • Introduction
  • Cementing Materials
  • Cement Additives
  • Cement Bonding
  • Flow Properties of Primary Cements
  • Displacement Mechanics
  • Cost of Primary Cementing
  • Special Problem Situations-New Developments
  • Primary Cementing Practices

Well Completion Design

  • Factors Influencing Well Completion Design
  • Conventional Tubular Configuration
  • Unconventional Tubular Configurations
  • Sizing Production Tubular
  • Completion Interval
  • Permanent Well Completions (PWC)
  • Tubingless Completion

Tubing Strings,Packers,Subsurface Control Equipment

  • Tubing Strings
  • Steel Grades
  • Tubing Connections
  • Makeup of API Threaded connection
  • Design of Tubing Strings
  • High Strength Tubing
  • Physical Properties of Steel
  • Sensitivities of High Strength Tubing
  • Tubing Inspection
  • Tubing Handling Practices
  • Equipment for Use With-Strength Tubing
  • Tubing Running Practices
  • API Publication List
  • Packers and Subsurface Control Equipment
  • Production Packers
  • Subsurface Control Equipment

Perforating Oil and Gas Wells

  • Introduction
  • Types of Perforators
  • Evaluation of Perforator Performance
  • Factors  Aftecting Gun Perforating Results
  • Perforating in a Clean Fluid with Differential Pressure Into Wellbore
  • A Comparison between the GEO-VANN System and Other Perforating Methods in Wells Equipped with Packers

Completion and Workover Fluids

  • Functions-Requirements-Selection Criteria
  • Formation Damage Related to Solids
  • Oil Fluids-Practical Application
  • Conventional Water-Base Mud
  • Oil Base or Invert-Emulsion Muds
  • Foam
  • Perforating Fluids
  • Packer Fluids
  • Well Killing

Through-Tubing Production Logging

  • Introduction
  • Logging Device
  • Application of Through-Tubing Production logging
  • Field Examples of Production Logging Techniques
  • Primary Cement Evaluation

Problem Well Analysis

  • Problem Wells
  • Problem Well Analysis Checklist

Parafin and Asphaltene

  • Introduction
  • Paraffin and Asphaltene Chemistry
  • Deposition Mechanisms
  • Removal of Wax Deposits
  • Preventing or Decreasing Wax Deposition
  • Design of Wax Control

Squeeze Cementing-Remedial Cementing

  • Introduction
  • Theoretical Considerations
  • Practical Considerations
  • Special Squeeze Cementing Situations
  • Planning a Squeeze Cement Job
  • Normal Operational Procedures
  • Other Operational Procedures
  • Plug-Back Operations
  • Special Cement Systems

Sand Control

  • Introduction
  • Reduction of Drag Force
  • Mechanical Methods of Sand Control
  • Practical Considerations in Gravel Packing
  • Use of screen Without Gravel
  • Resin Consolidation Methods

Formation Damage

  • Introduction
  • Basic Causes of Damage
  • Classification of Damage Mechanisms
  • Reduced Absolute Permeability
  • Increased Fluid Viscosity (Emulsion)
  • Diagnosis of Formation Damage

Surfactants for Well Treatments

  • Characteristics of Surfactants
  • Use and Action of Surfactant
  • Formation Damage Susceptible to Surfactant Treatment
  • Preventing or Removing Damage
  • Well Stimulation With Surfactants
  • Increasing Effectiveness of Rod Pumping
  • Prevention of Well Damage

Acidizing

  • Acids Used in Well Stimulation
  • Acid Additives
  • Carbonate Acidizing
  • Acidizing Techniques for Caronat Formations
  • Sandstone Acidizing
  • Potential Safety Hazard in Acidizing

Hydraulic Fracturing

  • Introduction
  • Mechanics of Fracturing
  • Production Increase from Fracturing
  • Propping the Fracture
  • Frac Fluids
  • Frac Job Design
  • Frac Job Evaluation Techniques

Scale Deposition,Removal,and Prevention

  • Introduction
  • Causes of Scale Deposition
  • Prediction and Identification of Scale
  • Scale Removal
  • Scale Prevention

Corrosion Control

  • The Corrosion Process
  • Detection and Measurement of Corrosion
  • Corrosion Control

Workover and Completion Rigs Workover System

  • Conventional Production Rigs
  • Non-Conventional Workovers System
  • Concentric Tubing Workovers

Workover Planning

  • Reasons for Workover
  • Workover to Alleviate Formation Damage
  • Workover for Low Permeability Well
  • Workover of Wells in Partially Pressure-Depleted Reservoirs
  • Workover to Reduces Water Production in Oil and Gas Wells
  • Workover to Reduces Gas Production in Oil Wells
  • Workover for Sand Control
  • Workover to Repair Mechanical Failure
  • Workover to Change Zones or Reservoirs
  • Workover to Multicomplete
  • Workover to Increase Production in Well Producing High Viscosity (Low Gravity) Oil
  • Workover Economics

PRE-REQUISITE:

Backgrounds: Operator, Senior Operator, Engineer/Non Engineer

Investasi dan Fasilitas Training

  • Harga : (dilampirkan dalam Brosur penawaran)
  • Fasilitas : Certificate, Training kits, USB 8 GB, Lunch, Coffe Break, Souvenir, City Tour
  • Untuk peserta luar kota disediakan transportasi antar-jemput dari Bandara/Stasiun ke Hotel (berlaku bagi perusahaan yang mengirimkan minimal 2 peserta) Khusus untuk training di Yogyakarta.

 

Permintaan Brosur penawaran Training ( Waktu dan Tempat) silahkan Menghubungi kami.

Catatan :

  • Pelatihan ini dapat di-customized sesuai kebutuhan perusahaan Anda bila diselenggarakan dalam bentuk In-House Training. Untuk permintaan In-House Training dengan jenis topik lainya, silahkan mengirimkan ke alamat email yang tercantum di web kami.
  • Request Training. Jika anda membutuhkan informasi pelatihan yang belum tercantum pada website ini, atau anda ingin memberikan usulan materi yang sesuai dengan tingkat kebutuhan perusahaan anda, silahkan mengirimkan ke alamat email yang tercantum.
  • Bila tidak ada tanggal dan waktu atau yang tercantum sudah kadaluarsa didalam artikel mohon tanyakan kepada kami untuk jadwal terbarunya.

Informasi Jadwal training 2016 | 2017 | 2018 | 2019 | 2020 | 2021 | 2022 | di Yogyakarta, Jakarta, Bandung, Bogor, Surabaya, Malang, Bali, Lombok, Balikpapan, Makassar, Medan, Batam, Riau, Pontianak, Semarang, Solo, Manado, dan Kota-kota lainnya

Workover And Well Stimulation

Workover And Well Stimulation

Deskripsi Pelatihan Workover And Well Stimulation

Training ini akan memberikan pengetahuan mengenai faktor-faktor yang mempengaruhi proses pemilihan dan desain untuk sumur, dan penjelasan-penjelasan yang harus dilakukan. Selain penjelasan teknis, peserta juga akan diberikan simulasi mengenai pemecahan masalah, strategi untuk mendapatkan hasil maksimal dari peralatan, dan metodologi untuk operasi lapangan secara rinci melalui pemrograman.

Tujuan Pelatihan Workover And Well Stimulation

Setelah mengikuti kursus ini, peserta kursus diharapkan mampu :

  1. Memahami dasar-dasar teknik produksi
  2. Memahami problem penyebab penurunan produksi
  3. Memahami problem kerusakan formasi (formation damaged)
  4. Memahami alasan dilakukannya workover dan well stimulation
  5. Memahami dasar-dasar pengasaman (acidizing
  6. Memahami dasar-dasar perekahan hidrolik (hydraulic fracturing)
  7. Memahami manajemen operasi produksi dan perawatan sumur

Materi Pelatihan Workover And Well Stimulation

Dasar-dasar Teknik Produksi

  • Sistem produksi hidrokarbon
  • Analisa Sistem Produksi
  • Diagram Fasa
  • Reservoir Inflow Performance
  • Tubing (Outflow) Performance
  • Surface Pressure Loss
  • Completion Inflow Performance

Inflow Performance Relationship

  • Aliran fluida dalam media berpori
  • Productivity Index
  • Grafik Inflow Performance Relationship
  • Penentuan Flow Efficiency dari dua test aliran
  • Peramalam grafik IPR untuk masa yang akan dating
  • Inflow Performance untuk Artificial Lift

Problem Penurunan Produksi

  • Problem Sumur (Well Problems)
  • Problem Reservoir (Reservoir Problems)

Formation Damage

  • Penyebab turunnya laju produksi
  • Menghilangkan damage

Well Intervension

  • Pendekatan Umum Pekerjaan Workover
  • Jenis-Jenis Well Intervension
  • Peralatan Workover
  • Pemilihan Workover Rig
  • Analisa Keuntungan Workover

Fluida Workover dan Completion

  • Jenis-jenis Fluida
  • Penggunaan Fluida
  • Karakteristik Fluida
  • Memilih Densitas Cairan
  • Unit Filter
  • Perencanaan Fluida Workover/Completion

Perawatan Sumur (Workover)

  • Kerusakan Peralatan
  • Masalah Parafin
  • Pengendapan Scale dan pengontrolannya
  • Masalah Pasir
  • Kerusakan Formasi

Pengasaman (Acidizing)

  • Pendahuluan
  • Reaksi Kimia antara Asam dengan Mineral Batuan
  • Penyebaran Asam Dalam Media Berpori
  • Acid Additives
  • Mineralogi Batuan Reservoar
  • Memilih Kandidat Sumur untuk Pengasaman
  • Disain Proyek Pengasaman

Perekahan Hidrolik (Hydraulic Fracturing)

  • Pendahuluan
  • Mekanika Batuan
  • Mekanika Fluida Perekahan Hidrolik
  • Fluida Perekah dan Aditif
  • Proppant
  • Model Geometri Perekahan
  • Analisa Tekanan Perekahan
  • Datafrac
  • Disain Perekahan
  • Pelaksanaan Perekahan di Lapangan
  • Evaluasi Perekahan Hidrolik
  • Quality Control

Sand Control

  • Pendahuluan
  • Analisa Butiran Pasir
  • Sand Consolidation
  • Resin Coated Gravelpack
  • Pipa Saringan
  • Gravel Pack

Perubahan Zona Produksi

  • Pendahuluan
  • Plugging Back
  • Drilling Deeper
  • Sidetracking

Target Peserta

  • Production Engineers, Production Supervisor
  • Drilling Workover personnel
  • Pumpers
  • Logistic Personnel
  • Personil lainnya yang terlibat dalam kegiatan operasi produksi.

Investasi dan Fasilitas Training

  • Harga : (dilampirkan dalam Brosur penawaran)
  • Fasilitas : Certificate, Training kits, USB 8 GB, Lunch, Coffe Break, Souvenir, City Tour
  • Untuk peserta luar kota disediakan transportasi antar-jemput dari Bandara/Stasiun ke Hotel (berlaku bagi perusahaan yang mengirimkan minimal 2 peserta) Khusus untuk training di Yogyakarta.

 

Permintaan Brosur penawaran Training ( Waktu dan Tempat) silahkan Menghubungi kami.

Catatan :

  • Pelatihan ini dapat di-customized sesuai kebutuhan perusahaan Anda bila diselenggarakan dalam bentuk In-House Training. Untuk permintaan In-House Training dengan jenis topik lainya, silahkan mengirimkan ke alamat email yang tercantum di web kami.
  • Request Training. Jika anda membutuhkan informasi pelatihan yang belum tercantum pada website ini, atau anda ingin memberikan usulan materi yang sesuai dengan tingkat kebutuhan perusahaan anda, silahkan mengirimkan ke alamat email yang tercantum.
  • Bila tidak ada tanggal dan waktu atau yang tercantum sudah kadaluarsa didalam artikel mohon tanyakan kepada kami untuk jadwal terbarunya.

Informasi Jadwal training 2016 | 2017 | 2018 | 2019 | 2020 | 2021 | 2022 | di Yogyakarta, Jakarta, Bandung, Bogor, Surabaya, Malang, Bali, Lombok, Balikpapan, Makassar, Medan, Batam, Riau, Pontianak, Semarang, Solo, Manado, dan Kota-kota lainnya

PRODUCTION OPERATION MANAGEMENT FOR MANAGERS

PRODUCTION OPERATION MANAGEMENT FOR MANAGERS

Objective Training Petroleum Operation Management

After completing this course participants are expected to:

  • Understanding the basic principles in performing calculations on the optimization of production operations of oil wells, gas and geothermal reservoir, the implementation of production optimization is to enhance the performance of the well and field production (Enhanced Oil Recovery)..
  • Conduct simple diagnosis and understand the problem solving in the oil gas well operation.
  • Be able to create a simple analysis of the data of oil wells, gas and geothermal.  Forecasting performance and plan the development of production operations
  • Be able to conduct simple quantitative calculations from all the data acquisition, tubing, flowline, choke, perforated, gravel-packs, and subsurface safety valve in the well.  Plan the development of production based on the calculation of the production capacity of each well
  • Using the knowledge of production operations for solving well problems, such as: cementing, scaling, sand, corrosion and formation damage that may occur in oil and gas wells.
  • Understand the basic principles of production operation’s design: cementing, workover, well stimulation with acidizing and hydraulic fracturing,  and others

AUDIENCE:

  • No specified  (Engineer or Non Engineer)



MATERIAL OUTLINE PETROLEUM OPERATION MANAGEMENT :

  1. The origin of Oil and Gas Reservoir  and Geologic Considerations in producing Operation
    • a.    Introduction
    • b.    Sandstone Reservoirs
    • c.    Geologic Factors Affecting Reservoir Properties in Sandstone
    • d.    Application of Geologic concepts in Specific Sandstone
    • e.    Carbonate Reservoirs
    • f.    Application of Geologic Concepts in Carbonate Reservoirs
  2. Exploration Method of Oil and Gas Reservoir
    • a.    Magnetic Method
    • b.    Gravity Method
    • c.    Seismic Method
  3. Introduction : Rotary Drilling Operations
    • a.    Steps to drilling a well
    • b.    Types of rigs
    • c.    Rig Components
    • d.    Rig Systems
  4. Mud System
    • a.    General Equations and ConceptsDiagnostic tests
    • b.    Water based muds
    • c.    Oil based muds
    • d.    Additives
    • e.    Mud handling system
  5. Cementing
    • a.    Tubing DesignFunctions of cement
    • b.    Cement Types
    • c.    Cement Additives
  6. Oil Field Tubulars and Hydraulics
    • a.    Drill string
    • b.    Casing and tubing
    • c.    Casing classification
    • d.    Stresses on casing
    • e.    Casing setting depth
    • f.    Burst and collapse calculations
    • g.    Wellheads
  7. Drilling System – Pressure Loss Calculations
    • a.    Hydrostatics
    • b.    Buoyancy
    • c.    Flow through pipes and annuli
    • d.    Flow path
    • e.    Pressure loss calculations
  8. Drilling System – Bit & Nozzles
    • a.    Hydrostatics Bit Types
    • b.    Bit Parts
    • c.    Bit Classification
    • d.    Bit Nozzles
  9. Introduction to Well Control
    • a.    Hydrostatics Definitions
    • b.    Causes of kicks
    • c.    Kick indicators
    • d.    Shut-in procedure
    • e.    Well Kill Procedures
  10. Directional Drilling
    • a.    Reasons for directional wells
    • b.    Planning Trajectory
    • c.    Kickoff Methods
    • d.    Survey Methods
    • e.    Survey Calculations
    • f.    Hole Assemblies
  11. Well Completion Design
    • a.    Factors Influencing Well Completion Design
    • b.    Conventional Tubular Configuration
    • c.    Unconventional Tubular Configurations
    • d.    Sizing Production Tubular
    • e.    Completion Interval
    • f.    Permanent Well Completions (PWC)
    • g.    Tubingless Completion
  12. Perforating Oil and Gas Wells
    • a.    Introduction
    • b.    Types of Perforators
    • c.    Evaluation of Perforator Performance
    • d.    Factors  Affecting Gun Perforating Results
    • e.    Perforating in a Clean Fluid with Differential Pressure Into Wellbore
  13. Production Logging Technology
    • a.    Introduction
    • b.    Logging Device
    • c.    Application of Through-Tubing Production logging
    • d.    Field Examples of Production Logging Techniques
    • e.    Primary Cement Evaluation
  14. Problem Well Analysis
    • a.    Problem Wells
    • b.    Problem Well Analysis Checklist
  15. Sand Control
    • a.    Introduction
    • b.    Reduction of Drag Force
    • c.    Mechanical Methods of Sand Control
    • d.    Practical Considerations in Gravel Packing
    • e.    Use of screen Without Gravel
    • f.    Resin Consolidation Methods
  16. Formation Damage
    • a.    Introduction
    • b.    Basic Causes of Damage
    • c.    Classification of Damage Mechanisms
    • d.    Reduced Absolute Permeability
    • e.    Increased Fluid Viscosity (Emulsion)
    • f.    Diagnosis of Formation Damage
  17. Acidizing
    • a.    Acid Additives
    • b.    Carbonate Acidizing
    • c.    Acidizing Techniques for Caronat Formations
    • d.    Sandstone Acidizing
    • e.    Potential Safety Hazard in Acidizing
    • f.    Acids Used in Well Stimulation
  18. Hydraulic Fracturing
    • a.    Introduction
    • b.    Mechanics of Fracturing
    • c.    Production Increase from Fracturing
    • d.    Propping the Fracture
    • e.    Frac Fluids
    • f.    Frac Job Design
    • g.    Frac Job Evaluation Techniques
  19. Scale Deposition Removal and Prevention
    • a.    Introduction
    • b.    Causes of Scale Deposition
    • c.    Prediction and Identification of Scale
    • d.    Scale Removal
    • e.    Scale Prevention
  20. Corrosion Control
    • a.    The Corrosion Process
    • b.    Detection and Measurement of Corrosion
    • c.    Corrosion Control
  21. Crude Oil and Gas Field Processing Sistem
    • a.    Separator and Principle of Separation
    • b.    Design of Separator
    • c.    Sweetening Process
    • d.    Oil and Dehydration
    • e.    Liquid Recovery Sistem
    • f.    Compression System
  22. Principles of Measurement
    • a.    Introduction to Measurement
    • b.    Crude Oil Measurement
    • c.    Gas Measurement
  23. Artificial Lift Method
    • a.    Gas Lift
    • b.    Submersible Pump
    • c.    Sucker Rod Pump
    • d.    Hydraulic Pump
  24. Enhanced Oil Recovery Process:
    • a.    Classification of EOR methods
    • b.    Description of solvent miscible processes
    • c.    Description of chemical flood proves
    • d.    Description of thermal recovery processes
    • e.    Microbial and other EOR processes
    • f.    Objectives of EOR methods
    • g.    Types of solvents and miscibility development
    • h.    Polymer, alkaline, surfactant and mecellr-polymer
    • i.    In-situ combustion, cyclic steam and steam flood
    • j.    Comparison between various EOR methods
  25. Screening Guidelines and Optimization :
    • a.    Key parameters used in reservoir screening
    • b.    Available resources and economical considerations
    • c.    Optimization parameters and criteria
    • d.    Concept of incremental recovery
    • e.    Limits on applicability of certain EOR methods
    • f.    Typical field cases of various EOR methods

Investasi dan Fasilitas Training

  • Harga : (dilampirkan dalam Brosur penawaran)
  • Fasilitas : Certificate, Training kits, USB 8 GB, Lunch, Coffe Break, Souvenir, City Tour
  • Untuk peserta luar kota disediakan transportasi antar-jemput dari Bandara/Stasiun ke Hotel (berlaku bagi perusahaan yang mengirimkan minimal 2 peserta) Khusus untuk training di Yogyakarta.

 

Permintaan Brosur penawaran Training ( Waktu dan Tempat) silahkan Menghubungi kami.

Catatan :

  • Pelatihan ini dapat di-customized sesuai kebutuhan perusahaan Anda bila diselenggarakan dalam bentuk In-House Training. Untuk permintaan In-House Training dengan jenis topik lainya, silahkan mengirimkan ke alamat email yang tercantum di web kami.
  • Request Training. Jika anda membutuhkan informasi pelatihan yang belum tercantum pada website ini, atau anda ingin memberikan usulan materi yang sesuai dengan tingkat kebutuhan perusahaan anda, silahkan mengirimkan ke alamat email yang tercantum.
  • Bila tidak ada tanggal dan waktu atau yang tercantum sudah kadaluarsa didalam artikel mohon tanyakan kepada kami untuk jadwal terbarunya.

Informasi Jadwal training 2016 | 2017 | 2018 | 2019 | 2020 | 2021 | 2022 | di Yogyakarta, Jakarta, Bandung, Bogor, Surabaya, Malang, Bali, Lombok, Balikpapan, Makassar, Medan, Batam, Riau, Pontianak, Semarang, Solo, Manado, dan Kota-kota lainnya

 

Strategi Peningkatan Produktivitas Lapangan Minyak

Strategi Peningkatan Produktivitas Lapangan Minyak

OBJECTIVES TRAINING OIL FIELD 

  1. Memberikan pengetahuan tentang faktor-faktor penyebab kehilangan produksi suatu sumur minyak/gas.
  2. Memberikan teknik-teknik identifikasi masalah sumur dan usaha penanggulangannya.
  3. 100 cara meningkatkan produktivitas lapangan tua

CAKUPAN MATERI TRAINING OIL FIELD 

  1. Typical Well Problem (Faktor-faktor penyebab kehilangan produksi)
  2. Formation Damage
  3. Well Problem Identification – Well diagnostic
  4. Decline Curve Analysis
  5. Projek mikro untuk meningkatkan produktivitas lapangan minyak
  6. Peralatan Bawah Permukaan (Down-hole equipment).
  7. Well Completion and consideration:  Single tubing, Dual Tubing, Monobore, Coiled Tubing Completion, Gavel pack Completion, Multilaral Well.
  8. Cementing
  9. Perforation
  10. Sand Control
  11. Water Shut off
  12. Well Stimulation: Acidizing and Hydraulic Fracturing
  13. Interactive discussion

WHO SHOULD ATTEND

  • Production Engineer
  • Production Supervisor
  • Production Operator
  • Every one else who want to know on oil field production

Investasi dan Fasilitas Training

  • Harga : (dilampirkan dalam Brosur penawaran)
  • Fasilitas : Certificate, Training kits, USB 8 GB, Lunch, Coffe Break, Souvenir, City Tour
  • Untuk peserta luar kota disediakan transportasi antar-jemput dari Bandara/Stasiun ke Hotel (berlaku bagi perusahaan yang mengirimkan minimal 2 peserta) Khusus untuk training di Yogyakarta.

 

Permintaan Brosur penawaran Training ( Waktu dan Tempat) silahkan Menghubungi kami.

Catatan :

  • Pelatihan ini dapat di-customized sesuai kebutuhan perusahaan Anda bila diselenggarakan dalam bentuk In-House Training. Untuk permintaan In-House Training dengan jenis topik lainya, silahkan mengirimkan ke alamat email yang tercantum di web kami.
  • Request Training. Jika anda membutuhkan informasi pelatihan yang belum tercantum pada website ini, atau anda ingin memberikan usulan materi yang sesuai dengan tingkat kebutuhan perusahaan anda, silahkan mengirimkan ke alamat email yang tercantum.
  • Bila tidak ada tanggal dan waktu atau yang tercantum sudah kadaluarsa didalam artikel mohon tanyakan kepada kami untuk jadwal terbarunya.

Informasi Jadwal training 2016 | 2017 | 2018 | 2019 | 2020 | 2021 | 2022 | di Yogyakarta, Jakarta, Bandung, Bogor, Surabaya, Malang, Bali, Lombok, Balikpapan, Makassar, Medan, Batam, Riau, Pontianak, Semarang, Solo, Manado, dan Kota-kota lainnya